PDS1040CTL_10 Datasheet, PDF (2/5 Pages) Diodes Incorporated – 10A DUAL LOW VF SCHOTTKY BARRIER RECTIFIER

Maximum Ratings @T_A = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Average Rectified Output Current (See also Figure 5) per element
total device
Non-Repetitive Peak Forward Surge Current, per element
8.3ms Single half sine-wave Superimposed on Rated Load
Symbol
V_RRM
V_RWM
V_R
V_R(RMS)
I_O
I_FSM
PDS1040CTL
Value
Unit
40
V
28
V
5
10
A
110
A
Thermal Characteristics
Characteristic
Thermal Resistance Junction to Soldering Point
Thermal Resistance Junction to Ambient Air (Note 3)
Thermal Resistance Junction to Ambient Air (Note 4)
Thermal Resistance Junction to Ambient Air (Note 5)
Operating and Storage Temperature Range
Symbol
R_θJS
R_θJA
R_θJA
R_θJA
T_J, T_STG
Typ
Max
⎯
2.0
95
⎯
75
⎯
50
⎯
-65 to +150
Unit
°C/W
°C/W
°C/W
°C/W
°C
Electrical Characteristics @T_A = 25°C unless otherwise specified
Characteristic
Reverse Breakdown Voltage (Note 6)
Forward Voltage Per Element
Reverse Leakage Current (Note 6) Per Element
Symbol
V_(BR)R
V_F
I_R
Min
Typ
Max
Unit
40
⎯
⎯
V
⎯
0.465
0.50
⎯
0.41
0.45
⎯
⎯
0.39
0.43
0.55
0.60
V
⎯
0.53
0.57
⎯
0.52
0.56
⎯
20
200
μA
⎯
3
25
mA
⎯
15
150
μA
⎯
2.5
10
mA
⎯
6
80
μA
⎯
1
5
mA
Notes:
3. FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com.
4. Polyimide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com.
5. Polyimide PCB, 2 oz. Copper. Cathode pad dimensions 9.4mm x 7.2mm. Anode pad dimensions 2.7mm x 1.6mm.
6. Short duration pulse test used to minimize self-heating effect.
Test Condition
I_R = 500μA
I_F = 5A, T_S = 25°C
I_F = 5A, T_S = 100°C
I_F = 5A, T_S = 125°C
I_F = 10A, T_S = 25°C
I_F = 10A, T_S = 100°C
I_F = 10A, T_S = 125°C
V_R = 40V, T_S = 25°C
V_R = 40V, T_S = 100°C
V_R = 35V, T_S = 25°C
V_R = 35V, T_S = 100°C
V_R = 17.5V, T_S = 25°C
V_R = 17.5V, T_S = 100°C
PowerDI is a registered trademark of Diodes Incorporated.
PDS1040CTL
Document number: DS30485 Rev. 11 - 2
2 of 5
www.diodes.com
November 2010
© Diodes Incorporated