DT1140-04LP Datasheet, PDF (2/5 Pages) Diodes Incorporated – 4 CHANNEL LOW CAPACITANCE TVS DIODE ARRAY

Maximum Ratings (@T_A = +25°C, unless otherwise specified.)
Characteristic
Peak Pulse Current, per IEC 61000-4-5
Peak Pulse Power, per IEC 61000-4-5
Operating Voltage (DC)
ESD Protection – Contact Discharge, per IEC 61000-4-2
ESD Protection – Air Discharge, per IEC 61000-4-2
Operating Temperature
Storage Temperature
Symbol
I_PP
P_PP
V_DC
V_{ESD_Contact}
V_{ESD_Air}
T_OP
T_STG
Value
6
60
6
+20/-16
+20/-18
-55 to +85
-55 to +150
DT1140-04LP
Unit
A
W
V
kV
kV
ºC
°C
Conditions
I/O to V_SS, 8/20µs
I/O to V_SS, 8/20µs
I/O to V_SS
I/O to V_SS
I/O to V_SS
—
—
Thermal Characteristics
Characteristic
Power Dissipation Typical(Note 5)
Thermal Resistance, Junction to Ambient Typical(Note 5)
Symbol
P_D
R_JA
Value
350
360
Unit
mW
°C/W
Electrical Characteristics (@T_A = +25°C, unless otherwise specified.)
Characteristic
Reverse Working Voltage
Reverse Current (Note 6)
Reverse Breakdown Voltage
Forward Clamping Voltage
Holding Voltage
Reverse Clamping Voltage (Note 7)
Reverse Clamping Voltage (Note 7)
Trigger Voltage
ESD Clamping Voltage
Dynamic Reverse Resistance
Dynamic Forward Resistance
Channel Input Capacitance
Symbol
Min
V_RWM
—
I_R
—
V_BR
6
V_F
-1.0
V_H
5.5
V_C
—
V_C
—
V_TRIG
—
V_ESD
—
R_DIF-R
—
R_DIF-F
—
C_I/O
—
Typ
—
—
—
-0.85
—
6.4
9
—
9
0.25
0.25
0.5
Max
5.5
0.5
—
—
—
—
10
9.5
—
—
—
0.65
Unit
V
μA
V
V
V
V
V
V
V
Ω
Ω
pF
Test Conditions
I_R=1mA, , I/O to V_SS
V_R = 5V, I/O to V_SS
I_R = 1mA, I/O to V_SS
I_F = -15mA, I/O to V_SS
—
I_PP = 1A, I/O to V_SS, 8/20µs
I_PP = 6A, I/O to V_SS, 8/20µs
—
TLP, 10A, tp = 100 ns, I/O to V_SS
TLP, 10A, tp = 100 ns, I/O to V_SS
TLP, 10A, tp = 100 ns, V_SS to I/O
V_I/O = 2.5V, V_SS = 0V, f = 1MHz
Notes:
5. Device mounted on FR-4 PCB pad layout (2oz copper) as shown on Diodes, Inc. suggested pad layout AP02001, which can be found on our website
at http://www.diodes.com.
6. Short duration pulse test used to minimize self-heating effect.
7. Clamping voltage value is based on an 8x20µs peak pulse current (I_pp) waveform.
DT1140-04LP
Document number: DS36293 Rev. 2 - 2
2 of 5
www.diodes.com
September 2013
© Diodes Incorporated