DFLS260_15 Datasheet, PDF (2/5 Pages) Diodes Incorporated – 2.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER POWERDI®123

DFLS260
Maximum Ratings (@T_A = +25°C, unless otherwise specified.)
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Average Forward Current
Non-Repetitive Peak Forward Surge Current 8.3ms
single half sine-wave superimposed on rated load
Symbol
V_RRM
V_RWM
V_R
V_R(RMS)
I_F(AV)
I_FSM
Value
60
42
2.0
50
Unit
V
V
A
A
Thermal Characteristics
Characteristic
Thermal Resistance Junction to Soldering Point (Note 6)
Thermal Resistance Junction to Ambient (Note 5)
Operating and Storage Temperature Range
Symbol
R_θJS
R_θJA
T_J, T_STG
Typ
Max
⎯
6
125
⎯
-65 to +150
Unit
°C/W
°C/W
°C
Electrical Characteristics (@T_A = +25°C, unless otherwise specified.)
Characteristic
Reverse Breakdown Voltage (Note 7)
Forward Voltage
Leakage Current (Note 7)
Total Capacitance
Symbol
Min
Typ
Max Unit
Test Condition
V_(BR)R
60
⎯
⎯
V I_R = 0.2mA
V_F
⎯
⎯
0.62
0.56
V ^{IF = 2.0A, TA = +25°C}
I_F = 2.0A, T_A = +125°C
I_R
⎯
⎯
0.1
mA V_R = 60V, T_A = +25°C
C_T
⎯
67
⎯
pF V_R = 10V, f = 1.0MHz
Notes:
5. Part mounted on FR-4 board with 2 oz., minimum recommended copper pad layout, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
6. Theoretical R _JS calculated from the top center of the die straight down to the PCB/cathode tab solder junction.
7. Short duration pulse test to minimize self-heating effect.
DFLS260
Document number: DS31476 Rev. 2 - 2
PowerDI is a registered trademark of Diodes Incorporated.
2 of 5
www.diodes.com
August 2012
© Diodes Incorporated