DFLS260Q_15 Datasheet, PDF (2/5 Pages) Diodes Incorporated – 2.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER

DFLS260Q
Maximum Ratings (@T_A = +25°C, unless otherwise specified.)
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V_RRM
V_RWM
60
V
V_R
RMS Reverse Voltage
V_R(RMS)
42
V
Average Forward Current
I_F(AV)
2.0
A
Non-Repetitive Peak Forward Surge Current 8.3ms
single half sine-wave superimposed on rated load
I_FSM
50
A
Thermal Characteristics
Characteristic
Thermal Resistance Junction to Soldering Point (Note 7)
Thermal Resistance Junction to Ambient (Note 6)
Operating and Storage Temperature Range
Symbol
R_θJS
R_θJA
T_J, T_STG
Typ
Max
⎯
6
125
⎯
-55 to +150
Unit
°C/W
°C/W
°C
Electrical Characteristics (@T_A = +25°C, unless otherwise specified.)
Characteristic
Reverse Breakdown Voltage (Note 8)
Forward Voltage
Leakage Current (Note 8)
Total Capacitance
Symbol Min
Typ
Max
Unit
Test Condition
V_(BR)R
60
⎯
⎯
V I_R = 0.2mA
V_F
⎯
⎯
0.62
0.56
V
I_F = 2.0A, T_A = +25°C
I_F = 2.0A, T_A = +125°C
I_R
⎯
⎯
0.1
mA V_R = 60V, T_A = +25°C
C_T
⎯
67
⎯
pF V_R = 10V, f = 1.0MHz
Notes:
6. Part mounted on FR-4 board with 2 oz., minimum recommended copper pad layout, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
7. Theoretical R _JS calculated from the top center of the die straight down to the PCB/cathode tab solder junction.
8. Short duration pulse test to minimize self-heating effect.
PowerDI is a registered trademark of Diodes Incorporated.
DFLS260Q
Document number: DS37113 Rev. 1 - 2
2 of 5
www.diodes.com
March 2014
© Diodes Incorporated