DFLS140Q_15 Datasheet, PDF (2/5 Pages) Diodes Incorporated – 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER

DFLS140Q
Maximum Ratings (@TA = +25°C, unless otherwise specified.)
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
VRRM
Working Peak Reverse Voltage
DC Blocking Voltage
VRWM
40
V
VR
RMS Reverse Voltage
VR(RMS)
28
V
Average Forward Current @ TT = +119°C
IF(AV)
1.1
A
Non-Repetitive Peak Forward Surge Current 8.3ms
Single Half Sine-Wave Superimposed on Rated Load
IFSM
40
A
Thermal Characteristics
Characteristic
Power Dissipation (Note 6)
Power Dissipation (Note 7)
Thermal Resistance Junction to Ambient (Note 6)
Thermal Resistance Junction to Ambient (Note 7)
Thermal Resistance Junction to Soldering (Note 8)
Operating Temperature Range
Storage Temperature Range
Symbol
PD
PD
RθJA
RθJA
RθJS
TJ
TSTG
Value
1.67
556
60
180
10
-55 to +125
-55 to +150
Unit
W
mW
°C/W
°C/W
°C/W
°C
°C
Electrical Characteristics (@TA = +25°C, unless otherwise specified.)
Characteristic
Reverse Breakdown Voltage (Note 9)
Forward Voltage
Leakage Current (Note 9)
Total Capacitance
Symbol Min
V(BR)R
40
VF


IR


CT

Typ

0.45
0.53


28
Max

0.51
0.61
20
6.0

Unit
Test Condition
V I_R = 20μA
V ^{IF = 0.5A}
IF = 1.1A
μA VR = 40V, TJ = +25°C
mA _{VR = 40V, TJ = +100°C}
pF V_R = 10V, f = 1.0MHz
Notes:
6. Part mounted on 50.8mm X 50.8mm GETEK board with 25.4mm X 25.4mm copper pad, 25% anode, 75% cathode. TA = +25°C.
7. Part mounted on FR-4 board with 1.8mm X 2.5mm cathode and 1.8mm X 1.2mm anode, 1 oz. copper pads. TA = +25°C.
8. Theoretical RθJS calculated from the top center of the die straight down to the PCB/cathode tab solder junction.
9. Short duration pulse test used to minimize self-heating effect.
PowerDI is a registered trademark of Diodes Incorporated.
DFLS140Q
Document number: DS37062 Rev. 2 - 2
2 of 5
www.diodes.com
May 2015
© Diodes Incorporated