DFLS1100_15 Datasheet, PDF (2/6 Pages) Diodes Incorporated – 1.0A HIGH VOLTAGE SCHOTTKY BARRIER RECTIFIER POWERDI®123

Maximum Ratings (@TA = +25°C, unless otherwise specified.)
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Forward Current rms (TC = +160°C, D = 0.5)
Average Forward Current
Non-Repetitive Peak Forward Surge Current 8.3ms
Single Half Sine-Wave Superimposed on Rated Load
Repetitive Peak Reverse Current
tp = 2μs, f = I kHz Square
Repetitive Peak Avalanche Power
tp = 1µs, TJ = +25°C
Non-repetitive Peak Reverse Current
tp = 100μs Square
Critical Rate of Rise of Reverse Voltage
(Rated VR, TJ = +25°C)
Symbol
VRRM
VRWM
VR
VR(RMS)
IF(RMS)
IF(AV)
IFSM
IRRM
PARM
IRSM
dV/dt
Value
100
71
2
1.0
50
1.0
1500
1.0
10000
DFLS1100
Unit
V
V
A
A
A
A
W
A
V/μs
Thermal Characteristics
Characteristic
Thermal Resistance Junction to Soldering (Note 6)
Thermal Resistance Junction to Ambient (Note 7) TA = +25°C
Thermal Resistance Junction to Case (Note 7) TA = +25°C
Operating and Storage Temperature Range
Symbol
R_JS
R_JA
R_JC
TJ, TSTG
Typ
Max
—
7
125
—
21
—
-55 to +175
Unit
°C/W
C
Electrical Characteristics (@TA = +25°C, unless otherwise specified.)
Characteristic
Reverse Breakdown Voltage (Note 8)
Forward Voltage
Leakage Current (Note 8)
Total Capacitance
Symbol
V(BR)R
VF
IR
CT
Min
Typ
Max Unit
Test Condition
100


V I_R = 1µA


0.77
IF = 1.0A, TA = +25C

0.58 0.62
V ^{IF = 1.0A, TA = +125C}


0.86
IF = 2.0A, TA = +25C

0.65
0.7
IF = 2.0A, TA = +125C


1
µA V_R = 100V, T_A = +25C

0.2
0.5
mA V_R = 100V, T_A = +125C

36

pF V_R = 5V_DC, f = 1MHz
Notes:
6. Theoretical RθJS calculated from the top center of the die straight down to the PCB/cathode tab solder junction.
7. Part mounted on FR-4 board with 2oz., minimum recommended copper pad layout, which can be found on our website at http://www.diodes.com.
8. Short duration pulse test used to minimize self-heating effect.
POWERDI is a registered trademark of Diodes Incorporated.
DFLS1100
Document number: DS30497 Rev. 12 - 2
2 of 6
www.diodes.com
September 2014
© Diodes Incorporated