ZXMS6004SGQ Datasheet, PDF (1/8 Pages) Diodes Incorporated – 60V N-CHANNEL SELF PROTECTED ENHANCEMENT MODE

ZXMS6004SGQ
60V N-CHANNEL SELF PROTECTED ENHANCEMENT MODE
INTELLIFET ^® MOSFET
Product Summary
 Continuous Drain Source Voltage V_DS= 60V
 On-State Resistance
500mΩ
 Nominal Load Current (V_IN = 5V) 1.3A
 Clamping Energy
480mJ
Description
The ZXMS6004SGQ is a self protected low side MOSFET with logic
level input. It integrates over-temperature, over-current, over-voltage
(active clamp) and ESD protected logic level functionality. The
ZXMS6004SGQ is ideal as a general purpose switch driven from 3.3V
or 5V microcontrollers in harsh environments where standard
MOSFETs are not rugged enough.
Applications
 Especially suited for loads with a high in-rush current such as
lamps and motors
 All types of resistive, inductive and capacitive loads in switching
applications
 μC compatible power switch for 12V and 24V DC applications
 Automotive rated
 Replaces electromechanical relays and discrete circuits.
 Linear Mode capability - the current-limiting protection circuitry is
designed to de-activate at low V_DS to minimise on state power
dissipation. The maximum DC operating current is therefore
determined by the thermal capability of the package/board
combination, rather than by the protection circuitry. This does not
compromise the product’s ability to self- protect at low V_DS.
Features and Benefits
 Compact High Power Dissipation Package
 Low Input Current
 Logic Level Input (3.3V and 5V)
 Short Circuit Protection with Auto Restart
 Over Voltage Protection (Active Clamp)
 Thermal Shutdown with Auto Restart
 Over-Current Protection
 Input Protection (ESD)
 High Continuous Current Rating
 Lead-Free Finish; RoHS compliant (Note 1 & 2)
 Halogen and Antimony Free. “Green” Device (Note 3)
 Qualified to AEC-Q101 Standards for High Reliability
 PPAP Capable (Note 4)
Mechanical Data
 Case: SOT-223
 Case Material: Molded Plastic, “Green” Molding Compound
 UL Flammability Classification Rating 94V-0
 Moisture Sensitivity: Level 1 per J-STD-020
 Terminals: Matte Tin Finish
 Weight: 0.112 grams (approximate)
SOT-223
Top View
Top view
Pin Out
Ordering Information
Notes:
Product
ZXMS6004SGQTA
Marking
ZXMS6004S
Reel size (inches)
7
Tape width (mm)
12
Quantity per reel
3,000 units
1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. Automotive products are AEC-Q101 qualified and are PPAP capable. Automotive, AEC-Q101 and standard products are electrically and thermally
the same, except where specified. For more information, please refer to http://www.diodes.com/quality/product_compliance_definitions/.
5. For packaging details, go to our website at http://www.diodes.com/products/packages.html.
Marking Information
ZXMS
6004S
ZXMS6004S = Product type Marking Code
IntelliFET is a registered trademark of Diodes Incorporated.
ZXMS6004SGQ
Document number: DS33610 Rev. 1 - 2
1 of 8
www.diodes.com
April 2014
© Diodes Incorporated