ZXMS6004FFQ Datasheet, PDF (1/9 Pages) Diodes Incorporated – 60V N-CHANNEL SELF PROTECTED ENHANCEMENT MODE

ZXMS6004FFQ
60V N-CHANNEL SELF PROTECTED ENH^DA^MNC^NE²M⁰E²N⁷T^UM^SO^SDE
IntelliFET MOSFET
Product Summary
 Continuous Drain Source Voltage: 60V
 On-State Resistance: 500mΩ
 Nominal Load Current (VIN = 5V): 1.3A
 Clamping Energy: 90mJ
Description
The ZXMS6004FFQ is a self-protected low side IntelliFET™ MOSFET
with logic level input. It integrates overtemperature, overcurrent,
overvoltage (active clamp) and ESD protected logic level functionality.
The ZXMS6004FFQ is ideal as a general purpose switch driven from
3.3V or 5V microcontrollers in harsh environments where standard
MOSFETs are not rugged enough.
Features and Benefits
 Compact High Power Dissipation Package
 Low Input Current
 Logic Level Input (3.3V and 5V)
 Short Circuit Protection with Auto Restart
 Overvoltage Protection (Active Clamp)
 Thermal Shutdown with Auto Restart
 Overcurrent Protection
 Input Protection (ESD)
 High Continuous Current Rating
 Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
 Halogen and Antimony Free. “Green” Device (Note 3)
 Qualified to AEC-Q101 Standards for High Reliability
 PPAP Capable (Note 4)
Applications
 Especially Suited for Loads with a High In-Rush Current such as
Lamps and Motors
 All Types of Resistive, Inductive and Capacitive Loads in
Switching Applications
 μC Compatible Power Switch for 12V and 24V DC Applications
 Automotive Rated
 Replaces Electromechanical Relays and Discrete Circuits
 Linear Mode Capability – the current-limiting protection circuitry
is designed to de-activate at low VDS to minimize on state power
dissipation. The maximum DC operating current is therefore
determined by the thermal capability of the package/board
combination, rather than by the protection circuitry. This does not
compromise the product’s ability to self-protect at low VDS.
SOT23F
Top View
Mechanical Data
 Case: SOT23F
 Case Material: Molded Plastic, “Green” Molding Compound.
UL Flammability Classification Rating 94V-0
 Moisture Sensitivity: Level 1 per J-STD-020
 Terminals: Matte Tin Finish
 Weight: 0.012 grams (Approximate)
S
D
IN
Top view
Pin Out
Ordering Information (Note 5)
Product
ZXMS6004FFQTA
Marking
1K6
Reel Size (inches)
7
Tape Width (mm)
12
Quantity per Reel
3,000
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. Automotive products are AEC-Q10x qualified and are PPAP capable. Refer to http://www.diodes.com/quality/product_compliance_definitions/.
5. For packaging details, go to our website at http://www.diodes.com/products/packages.html.
IntelliFET is a trademark of Diodes Incorporated
ZXMS6004FFQ
Document number: DS37132 Rev. 4 - 2
1 of 9
www.diodes.com
January 2016
© Diodes Incorporated