ZXMS6004DT8Q Datasheet, PDF (1/9 Pages) Diodes Incorporated – 60V N-CHANNEL SELF PROTECTED ENHANCEMENT MODE

ZXMS6004DT8Q
60V N-CHANNEL SELF PROTECTED ENHANCEMENT MODE
INTELLIFET^® MOSFET
Product Summary
 Continuous Drain Source Voltage V_DS = 60V
 On-State Resistance
500mΩ
 Nominal Load Current (V_IN = 5V)
1.2A
 Clamping Energy
210mJ
Description
The ZXMS6004DT8Q is a dual self protected low side MOSFET with
logic level input. It integrates over-temperature, over-current, over-
voltage (active clamp) and ESD protected logic level functionality. The
ZXMS6004DT8Q is ideal as a general purpose switch driven from
3.3V or 5V microcontrollers in harsh environments where standard
MOSFETs are not rugged enough.
Applications
 Two completely isolated independent channels
 Especially suited for loads with a high in-rush current such as
lamps and motors
 All types of resistive, inductive and capacitive loads in switching
applications
 μC compatible power switch for 12V and 24V DC applications.
 Automotive rated
 Replaces electromechanical relays and discrete circuits
 Linear Mode capability - the current-limiting protection circuitry is
designed to de-activate at low V_DS to minimise on state power
dissipation. The maximum DC operating current is therefore
determined by the thermal capability of the package/board
combination, rather than by the protection circuitry. This does not
compromise the product’s ability to self-protect at low V_DS.
SM-8
Features and Benefits

Compact Dual Package

Low Input Current

Logic Level Input (3.3V and 5V)

Short Circuit Protection with Auto Restart

Over Voltage Protection (active clamp)

Thermal Shutdown with Auto Restart

Over-Current Protection

Input Protection (ESD)

High Continuous Current Rating

Qualified to AEC-Q101 Standards for High Reliability

PPAP Capable

Lead-Free Finish; RoHS compliant (Note 1 & 2)

Halogen and Antimony Free. “Green” Device (Note 3)
Mechanical Data

Case: SM-8

Case Material: Molded Plastic, “Green” Molding Compound
UL Flammability Classification Rating 94V-0

Moisture Sensitivity: Level 1 per J-STD-020

Terminals: Matte Tin Finish

Weight: 0.117 grams (approximate)
1
IN1
D1
S1
D1
IN2
D2
S2
D2
Top View
Top view
Pin-Out
Ordering Information
Notes:
Product
ZXMS6004DT8QTA
Marking
ZXMS6004D
Reel size (inches)
7
Tape width (mm)
12
Quantity per reel
1,000 units
1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. Automotive products are AEC-Q101 qualified and are PPAP capable. Automotive, AEC-Q101 and standard products are electrically and thermally
the same, except where specified. For more information, please refer to http://www.diodes.com/quality/product_compliance_definitions/.
5. For packaging details, go to our website at http://www.diodes.com/products/packages.html.
IntelliFET is a registered trademark of Diodes Incorporated.
ZXMS6004DT8Q
Document number: DS32245 Rev. 2 -1
1 of 9
www.diodes.com
April 2014
© Diodes Incorporated