ZXMS6003GQ Datasheet, PDF (1/9 Pages) Diodes Incorporated – 60V N-CHANNEL SELF PROTECTED ENHANCEMENT MODE

Green
ZXMS6003GQ
60V N-CHANNEL SELF PROTECTED ENHANCEMENT MODE
INTELLIFET^®MOSFET WITH PROGRAMMABLE CURRENT LIMIT
Product Summary
• Continuous Drain Source Voltage V_DS = 60V
• On-State Resistance
500mΩ
• Nominal Load Current (V_IN = 5V) 1.4A
• Clamping Energy
550mJ
Description
Self protected low side MOSFET. Monolithic over temperature, over
current, over voltage (active clamp) and ESD protected logic level
functionality. Intended as a general purpose switch, with status
indication and programmable current limit.
Applications
• Especially suited for loads with a high in-rush current such as
lamps and motors
• All types of resistive, inductive and capacitive loads in switching
applications
• μC compatible power switch for 12V and 24V DC applications.
• Automotive rated
• Replaces electromechanical relays and discrete circuits
• Linear mode capability - the current-limiting protection circuitry
is designed to de-activate at low V_DS, in order not to
compromise the load current during normal operation. The
design max. DC operating current is therefore determined by
the thermal capability of the package/board combination, rather
than by the protection circuitry.
• Note: This does not compromise the product's ability to self-
protect during short-circuit load conditions
• The current limit is programmable via an external resistor R_prog
connected between Status and IN pins
• Status pin voltage reflects the gate drive being applied internally
to the power MOSFET
• With V_IN = 5V and R_prog = 24kΩ:
ƒ Status voltage: 5V indicates normal operation.
ƒ Status voltage: (2-3)V indicates that the device is in
current-limiting mode.
ƒ Status voltage < 1V indicates that the device is in thermal
shutdown.
Features and Benefits
• Current Limit Programmable Via External Resistor
• Status Pin (analog status indication)
• Logic Level Input
• Short Circuit Protection with Auto Restart
• Over Voltage Protection (active clamp)
• Thermal Shutdown with Auto Restart
• Over-Current Protection
• Input Protection (ESD)
• Load Dump Protection (actively protects load)
• High Continuous Current Rating
• Qualified to AEC-Q101 Standards for High Reliability
• PPAP Capable
• Lead-Free Finish; RoHS compliant (Note 1 & 2)
• Halogen and Antimony Free. “Green” Device (Note 3)
Mechanical Data
• Case: SOT223
• Case Material: Molded Plastic, “Green” Molding Compound UL
Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020
• Terminals: Matte Tin Finish
• Weight: 0.112 grams (approximate)
SOT223
Top View
N
ote: R_PROG must be connected between the Status and IN pins
Notes:
1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. Automotive products are AEC-Q100 qualified and are PPAP capable. Automotive, AEC-Q100 and standard products are electrically and thermally
the same, except where specified. For more information, please refer to http://www.diodes.com/quality/product_compliance_definitions/.
IntelliFET is a trademark of Diodes Incorporated.
ZXMS6003GQ
Document number: DS33607 Rev. 1 - 2
1 of 9
www.diodes.com
April 2014
© Diodes Incorporated