ZXMS6002GQ Datasheet, PDF (1/9 Pages) Diodes Incorporated – 60V N-CHANNEL SELF PROTECTED ENHANCEMENT MODE

ZXMS6002GQ
60V N-CHANNEL SELF PROTECTED ENHANCEMENT MODE
INTELLIFET ^® MOSFET WITH STATUS INDICATION
Product Summary
 Continuous Drain Source Voltage V_DS= 60V
 On-State Resistance
500mΩ
 Nominal Load Current (V_IN = 5V) 1.4A
 Clamping Energy
550mJ
Description
Self protected low side MOSFET. Monolithic over temperature, over
current, over voltage (active clamp) and ESD protected logic level
functionality.
Intended as a general purpose switch, with status indication and
programmable current limit.
Applications

Especially suited for loads with a high in-rush current such as
lamps and motors

All types of resistive, inductive and capacitive loads in
switching applications

μC compatible power switch for 12V and 24V DC applications

Automotive rated

Replaces electromechanical relays and discrete circuits

Linear mode capability - the current-limiting protection circuitry
is designed to de-activate at low V_DS, in order not to
compromise the load current during normal operation. The
design max. DC operating current is therefore determined by
the thermal capability of the package/board combination, rather
than by the protection circuitry.

Note: This does not compromise the product's ability to self-
protect during short-circuit load conditions.

Status pin voltage reflects the gate drive being applied
internally to the power MOSFET.

With V_IN = 5V:

Status voltage ~ 5V indicates normal operation

Status voltage ~ (2-3)V indicates that the device is in
current-limiting mode

Status voltage < 1V indicates that the device is in
thermal shutdown
Features and Benefits
 Status Pin (Analog Status Indication)
 Logic Level Input
 Short Circuit Protection with Auto Restart
 Over Voltage Protection (Active Clamp)
 Thermal Shutdown with Auto Restart
 Over-Current Protection
 Input Protection (ESD)
 Load Dump Protection (Actively Protects Load)
 High Continuous Current Rating
 Lead-Free Finish; RoHS compliant (Note 1 & 2)
 Halogen and Antimony Free. “Green” Device (Note 3)
 Qualified to AEC-Q101 Standards for High Reliability
 PPAP Capable (Note 4)
Mechanical Data

Case: SOT-223

Case Material: Molded Plastic, “Green” Molding Compound

UL Flammability Classification Rating 94V-0

Moisture Sensitivity: Level 1 per J-STD-020

Terminals: Matte Tin Finish

Weight: 0.112 grams (approximate)
Note: The tab is connected to the drain pin and must be electrically isolated
from the source pin. Connection of significant copper to the tab is
recommended for best thermal performance.
SOT-223
Top View
Top view
Pin Out
Ordering Information
Notes:
Product
ZXMS6002GQTA
Marking
ZXMS6002
Reel size (inches)
7
Tape width (mm)
12
Quantity per reel
1,000 units
1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. Automotive products are AEC-Q101 qualified and are PPAP capable. Automotive, AEC-Q101 and standard products are electrically and thermally
the same, except where specified. For more information, please refer to http://www.diodes.com/quality/product_compliance_definitions/.
5. For packaging details, go to our website at http://www.diodes.com/products/packages.html.
IntelliFET is a registered trademark of Diodes Incorporated.
ZXMS6002GQ
Document number: DS33606 Rev. 1 - 2
1 of 9
www.diodes.com
April 2014
© Diodes Incorporated