ZXMS6002G Datasheet, PDF (1/10 Pages) Zetex Semiconductors – 60V N-Channel self protected enhancement mode IntelliFET™ MOSFET with status indication

ZXMS6002G
60V N-Channel self protected enhancement mode
IntelliFET™ MOSFET with status indication
Summary
Continuous drain source voltage
On-state resistance
Nominal load current (V_IN = 5V)
Clamping energy
V_DS = 60V
500m⍀
1.4A
550mJ
Description
Self protected low side MOSFET. Monolithic
over temperature, over current, over voltage
(active clamp) and ESD protected logic level
functionality. Intended as a general purpose
switch, with status indication.
Features
• Status pin (analog status indication)
• Short circuit protection with auto restart
• Over voltage protection (active clamp)
• Thermal shutdown with auto restart
• Over-current protection
• Input protection (ESD)
• Load dump protection (actively protects
load)
• Logic level input
• High continuous current rating
D
Top view
S
Status
IN
Note: The tab is connected to the drain pin and
must be electrically isolated from the source
pin. Connection of significant copper to the tab
is recommended for best thermal performance.
Ordering information
Device
Part mark
ZXMS6002GTA
ZXMS6002
Reel size
(inches)
7
Tape width
(mm)
12 embossed
Quantity
per reel
1000
Issue 3 - June 2007
1
© Zetex Semiconductors plc 2007
www.zetex.com