ZXGD3102 Datasheet, PDF (1/15 Pages) Diodes Incorporated – ACTIVE OR’ING CONTROLLER

A Product Line of
Diodes Incorporated
ZXGD3102T8
ACTIVE OR’ING CONTROLLER
Description
The ZXGD3102 is intended to drive MOSFETs
configured as ideal diode replacements. The
device is comprised of a differential amplifier
detector stage and high current driver. The
detector monitors the reverse voltage of the
MOSFET such that if body diode conduction
occurs a positive voltage is applied to the
MOSFET’s Gate pin.
Once the positive voltage is applied to the Gate
the MOSFET switches on allowing reverse current
flow. The detectors’ output voltage is then
proportional to the MOSFET Drain-Source reverse
voltage drop and this is applied to the Gate via the
driver. This action provides a rapid turn off as
current decays.
Features
• Turn-off time typically 105ns
• 180V blocking voltage
• Proportional Gate drive
• 2A Source, 5A Sink driver
• V_CC Range 5-15V
• Low component count
Pin out details
Applications
• High Side OR’ing diode replacement for
Servers, Computer
• Low Side OR’ing diode replacement for
Telecoms
• Ideal diode applications
Typical Configuration
N/C 1
REF 2
GATEL 3
GATEH 4
SM8
8 DRAIN
7 BIAS
6 GND
5 V_CC
Ordering information
Device
Status
ZXGD3102T8TA Active
Package
Part Mark
Reel size
(inches)
SM8 ZXGD3102
7
Tape width
(mm)
12
Quantity per reel
1000
Issue 4, May 2009
1
© Diodes Incorporated 2008
www.diodes.com