ZXGD3009E6_15 Datasheet, PDF (1/8 Pages) Diodes Incorporated – 40V 2A GATE DRIVER IN SOT26

Description
ZXGD3009E6 is a high-speed non-inverting single gate driver for
switching MOSFETs. It can transfer up to 2A peak source/sink
current into the gate for effective charging and discharging the
capacitive load.
This gate driver ensures rapid switching of the MOSFET to minimize
power losses and distortion in high current switching applications. It
can typically drive 1A into the low gate impedance with just 10mA
input from a controller. Also, the turn-on and turn-off switching
behavior of the MOSFET can be individually tailored to suit an
application. In particular, by defining the switching characteristics
appropriately, EMI and cross conduction problems can be reduced.
Applications
Power MOSFET Gate Driving in:
• Power Supplies
• DC-DC Converters
• Amplifier output stages
A Product Line of
Diodes Incorporated
ZXGD3009E6
40V 2A GATE DRIVER IN SOT26
Features
• High-gain buffer with typically 1A output from 10mA input
• Emitter-follower that is rugged to latch-up / shoot-through issues
• Wide supply voltage to minimize on-losses
• Separate source and sink outputs for independent control of
MOSFET turn-on and turn-off times
• Optimized pin-out to simplify PCB layout and reduce parasitic
trace inductances
• Near-zero quiescent supply current
• Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2)
• Halogen and Antimony Free. “Green” Device (Note 3)
• Qualified to AEC-Q101 Standards for High Reliability
Mechanical Data
• Case: SOT26
• Case material: Molded Plastic. “Green” Molding Compound
UL Flammability Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020
• Terminals: Finish - Matte Tin Plated Leads, Solderable per
MIL-STD-202, Method 208
• Weight: 0.018 grams (approximate)
Internal Device
Schematic
SOT26
Top View
V_CC
SOURCE
IN
Not Internally
Connected
V_EE
SINK
Top View
Pin-Out
Pin Name
V_CC
IN
V_EE
SOURCE
SINK
Pin Function
Supply Voltage High
Driver Input
Supply Voltage Low
Source Current Output
Sink Current Output
Ordering Information (Note 4)
Product
ZXGD3009E6TA
Marking
3009
Reel size (inches)
7
Tape width (mm)
8
Quantity per reel
3,000
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. For packaging details, go to our website at http://www.diodes.com/products/packages.html.
Marking Information
3009
3009 = Product Type Marking Code
ZXGD3009E6
Datasheet Number: DS36885 Rev. 1 - 2
1 of 8
www.diodes.com
February 2014
© Diodes Incorporated