ZXGD3009DY_15 Datasheet, PDF (1/8 Pages) Diodes Incorporated – 40V 1A GATE DRIVER IN SOT363

Description
ZXGD3009DY is a high-speed, non-inverting single gate driver for
switching MOSFETs. It can transfer up to 1A peak source/sink current
into the gate for effective charging and discharging of the capacitive
load.
This gate driver ensures rapid switching of the MOSFET to minimize
power losses and distortion in high current switching applications. It
can typically drive 500mA into the low gate impedance with just 10mA
input from a controller. The turn-on and turn-off switching behavior of
the MOSFET can be individually tailored to suit an application. In
particular, by defining the switching characteristics appropriately, EMI
and cross conduction problems can be reduced.
Applications
Power MOSFET Gate Driving in:
 Power Supplies
 DC-DC Converters
 Amplifier Output Stages
A Product Line of
Diodes Incorporated
ZXGD3009DY
40V 1A GATE DRIVER IN SOT363
Features
 High-Gain Buffer with Typically 500mA Output from 10mA Input
 Emitter-Follower that is Rugged to Latch-Up/Shoot-Through
Issues
 Wide Supply Voltage to Minimize On-Losses
 Separate Source and Sink Outputs for Independent Control of
MOSFET Turn-On and Turn-Off Times
 Optimized Pin-Out to Simplify PCB Layout and Reduce
Parasitic Trace Inductances
 Near-Zero Quiescent Supply Current
 Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
 Halogen and Antimony Free. “Green” Device (Note 3)
Mechanical Data
 Case: SOT363
 Case material: Molded Plastic, “Green” Molding Compound.
UL Flammability Rating 94V-0
 Moisture Sensitivity: Level 1 per J-STD-020
 Terminals: Finish - Matte Tin Plated Leads.
Solderable per MIL-STD-202, Method 208
 Weight: 0.018 grams (Approximate)
SOT363
V _CC
IN
V_EE
SOURCE
Not Internally
Connected
SINK
Pin Name
VCC
IN
VEE
SOURCE
SINK
Pin Function
Supply Voltage High
Driver Input
Supply Voltage Low
Source Current Output
Sink Current Output
Internal Device
Schematic
Top View
Top View
Pin-Out
Ordering Information (Note 4)
Product
ZXGD3009DYTA
Marking
3009
Reel size (inches)
7
Tape width (mm)
8
Quantity per reel
3,000
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. For packaging details, go to our website at http://www.diodes.com/products/packages.html.
Marking Information
3009
3009 = Product Type Marking Code
ZXGD3009DY
Datasheet Number: DS36913 Rev. 3 - 2
1 of 8
www.diodes.com
November 2014
© Diodes Incorporated