ZXCT1041 Datasheet, PDF (1/12 Pages) Zetex Semiconductors – Bidirectional precision high-side current monitor

ZXCT1041
Bidirectional precision high-side current monitor
Description
The ZXCT1041 is a bidirectional precision high-
side current sense monitor. The output voltage
is proportional to the differential input voltage.
Direction of current flow is indicated by the
Flag pin.
The ZXCT1041 provides a fixed gain of 10 for
applications where minimal external
components are required.
The very low offset voltage enables a typical
accuracy of 2% for sense voltages of only
10mV, giving better tolerances for small sense
resistors necessary at higher currents.
The wide input voltage range of 20V down to
as low as 2.7V make it suitable for a range of
applications.
A minimum operating current of just 40␮A,
combined with a SOT23-5 package makes the
ZXCT1041 particularly suitable for portable
battery equipment.
Features
• Bidirectional high side measurement
• Output voltage scaling x10
• 2.7V to 20V high side voltage
• 35µA quiescent current
• 1% typical accuracy
• SOT23-5 package
Applications
• Battery management
• Over current monitor
• Battery gas gauging
• Motor control
Typical application circuit
Pin connections
V_IN+
R_S
V_IN-
Flag
S-
GND
OUT
S+
4
5
S+
S-
ZXCT1041
1
GND
2
OUT
3
Flag
V_OUT
Ordering information
Order code
Package
ZXCT1041E5TA
SOT23-5
Partmark
1041
Reel size
(inches)
7
Tape width
(mm)
8
Quantity
per reel
3000
Issue 2 - January 2008
1
© Zetex Semiconductors plc 2008
www.zetex.com