|
ZLDO1117Q Datasheet, PDF (1/14 Pages) Diodes Incorporated – AUTOMOTIVE COMPLIANT 1A LOW DROPOUT POSITIVE REGULATOR WITH FIXED AND ADJUSTABLE OUTPUTS | |||
|
Green
ZLDO1117Q
AUTOMOTIVE COMPLIANT 1A LOW DROPOUT POSITIVE REGULATOR
WITH FIXED AND ADJUSTABLE OUTPUTS
Description
Pin Assignments
The ZLDO1117Q is a low dropout positive adjustable or fixed-mode
regulator with 1A output current capability.
(Top View)
The ZLDO1117Q has a 2% tolerance across the industrial
temperature range and is guaranteed to have lower than 1.2V dropout
at full load current making it ideal to provide well-regulated outputs of
1.2V to 5.0V with input supply voltages up to 18V.
The ZLDO1117Q is ideally suited to provide well-regulated supplies
for low voltage IC applications such as high-speed bus termination
and low current 3.3V logic supply across the whole industrial
temperature range.
VIN
VOUT
ADJ/GND
Tab is VOUT
SOT223
The ZLDO1117Q has been qualified to AEC-Q100 Grade 2 and is
Automotive Compliant supporting PPAPs.
(Top View)
(Top View)
Features
ï· 1.2V Maximum Dropout at Full Load Current
ï· 2% Tolerance Over Temperature, Line and Load Variations
ï· Fast Transient Response
ï· Output Current Limiting
ï· Built-in Thermal Shutdown
ï· Good Noise Rejection
ï· Suitable for Use with MLCC Capacitors
ï· -40°C to +105°C Ambient Temperature Range
ï· Available in TO252 (DPAK) and SOT223 with âGreenâ Molding
Compound (No Br, Sb)
ï§ Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
ï§ Halogen and Antimony Free. âGreenâ Device (Note 3)
ï· Automotive Compliant
ï§ Qualified to AEC-Q100 Standards for High Reliability
ï§ PPAP Capable (Note 4)
3
VVinIN
2
VVoOuUtT
1
AAdjD(JG/GNDN)D
TTaabb iiss VVoOuUtT
TO252 (DPAK)
Notes:
1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporatedâs definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Greenâ products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. Automotive products are AEC-Q100 qualified and are PPAP capable. Refer to http://www.diodes.com/product_compliance_definitions.html.
Typical Applications Circuit
1A I/O â 1.8V Core Regulator
3.3V
4.7µF
MLCC
ZLDO1117Q-18
1.8V
4.7µF
MLCC
ZLDO1117Q
Document number: DS37075 Rev. 1 - 2
1 of 14
www.diodes.com
April 2016
© Diodes Incorporated
|
▷ |