English
Language : 

SM05 Datasheet, PDF (1/4 Pages) Semtech Corporation – TVS Diode Array
Features
• 300 Watts Peak Pulse Power (tp = 8x20μs)
• IEC 61000-4-2 (ESD): Air – 15kV, Contact – 8kV
• Dual Common Anode TVS
• SOT-23 Package Allows Either Two Separate Unidirectional
Configurations or a Single Bidirectional Configuration
• Lead Free/RoHS Compliant (Note 3)
• “Green” Device (Note 4)
• Qualified to AEC-Q101 Standards for High Reliability
SM05
DUAL SURFACE MOUNT TVS
Mechanical Data
• Case: SOT-23
• Case Material: Molded Plastic, “Green” Molding Compound,
Note 3. UL Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020
• Terminals: Matte Tin Finish annealed over Alloy 42 leadframe
(Lead Free Plating) Solderable per MIL-STD-202, Method 208
• Ordering Information: See Page 2
• Marking Information: See Page 2
• Weight: 0.0089 grams (approximate)
Top View
Device Schematic
Thermal Characteristics
Characteristic
Peak Pulse Power (tp = 8x20μs)
Thermal Resistance, Junction to Ambient
Operating and Storage Temperature Range
(Note 6) TA = 25°C
(Note 6) TA = 25°C
Symbol
Ppk
RθJA
TJ, TSTG
Value
300
417
-55 to +150
Unit
W
°C/W
°C
Electrical Characteristics @TA = 25°C unless otherwise specified (Note 7)
Reverse Breakdown
Standoff
Voltage
Voltage
VBR @ IT
VRWM (V) Min (V) Max (V)
5
6.2
7.3
Test
Current
IT (mA)
1.0
Max. Reverse
Leakage @ VRWM
(Note 5)
IR (μA)
10
Max. Clamping
Voltage @ IPP = 5A
(Note 2)
VC (V)
9.8
Max. Clamping Voltage
VC @ IPP (Note 2)
VC (V)
20.6
IPP (A)
17
Typical
Capacitance CT
(Note 1)
(pF)
230
Notes:
1. VR = 0V, f = 1MHz.
2. Clamping voltage value is based on an 8x20 μs peak pulse current (Ipp) waveform.
3. No purposefully added lead.
4. Diodes Inc.’s “Green” policy can be found on our website at http://www.diodes.com/products/lead_free/index.php.
5. Short duration pulse test used to minimize self-heating effect.
6. Device mounted on FR-4 PC board with suggested pad layout, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf.
Measured across pin 1 and pin 2.
SM05
Document number: DS31828 Rev. 4 - 2
1 of 4
www.diodes.com
April 2010
© Diodes Incorporated