SF10AG_15 Datasheet, PDF (1/4 Pages) Diodes Incorporated – 1.0A SUPER-FAST GLASS PASSIVATED RECTIFIER

NOT RECOMMENDED FOR NEW DESIGN
SF10AG - SF10JG
1.0A SUPER-FAST GLASS PASSIVATED RECTIFIER
Features
 Glass Passivated Die Construction
 Super-Fast Switching for High Efficiency
 Surge Overload Rating to 30A Peak
 Low Reverse Leakage Current
 Lead Free Finish, RoHS Compliant (Note 4)
Mechanical Data
 Case: DO-41
 Case Material: Molded Plastic. UL Flammability Classification
Rating 94V-0
 Moisture Sensitivity: Level 1 per J-STD-020C
 Terminals: Finish - Tin. Plated Leads Solderable per MIL-STD-202,
Method 208
 Polarity: Cathode Band
 Marking: Type Number
 Ordering Information: See Page 3
 Weight: 0.3 grams (approximate)
DO-41
Dim
Min
Max
A
25.40
—
B
4.06
5.21
C
0.71 0.864
D
2.00
2.72
All Dimensions in mm
Maximum Ratings and Electrical Characteristics @TA = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage (Note 5)
RMS Reverse Voltage
Symbol
VRRM
VRWM
VR
VR(RMS)
SF10 SF10 SF10 SF10 SF10 SF10 SF10 SF10
AG BG CG DG FG GG HG JG
50 100 150 200 300 400 500 600
35 70 105 140 210 280 350 420
Unit
V
V
Average Rectified Output Current
(Note 1)
@ TA = 75C
IO
1.0
A
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave Superimposed on Rated Load
IFSM
30
A
Forward Voltage
@ IF = 1.0A
VFM
0.95
1.3
1.5
V
Peak Reverse Current
at Rated DC Blocking Voltage (Note 5)
@ TA = 25C
@ TA = 100C
IRM
10
100
A
Reverse Recovery Time (Note 3)
trr
35
40
50
ns
Typical Total Capacitance (Note 2)
CT
75
50
pF
Thermal Resistance Junction to Ambient
R_JA
75
°C/W
Operating and Storage Temperature Range
T_j, TSTG
-65 to +150
C
Notes:
1. Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case.
2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
3. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. See figure 5.
4. RoHS revision 13.2.2003. High temperature solder exemption applied, see EU Directive Annex Note 7.
5. Short duration pulse test used to minimize self-heating effect.
DS24012 Rev. 5 - 3
1 of 3
www.diodes.com
SF10AG - SF10JG
© Diodes Incorporated