SD05-7 Datasheet, PDF (1/4 Pages) Diodes Incorporated – UNI-DIRECTIONAL SURFACE MOUNT TVS

Features
• 350 Watts Peak Pulse Power (tp = 8x20μs)
• IEC 61000-4-2 (ESD): Air – 15kV, Contact – 8kV
• IEC 61000-4-2 (ESD), HBM – 30kV
• Unidirectional Configuration
• Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
• Halogen and Antimony Free. “Green” Device (Note 3)
• Qualified to AEC-Q101 Standards for High Reliability
SOD323
Top View
SD05
UNI-DIRECTIONAL SURFACE MOUNT TVS
Mechanical Data
• Case: SOD323
• Case Material: Molded Plastic, “Green” Molding Compound,
Note 3. UL Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020
• Terminals: Matte Tin Finish annealed over Alloy 42 leadframe
(Lead Free Plating) Solderable per MIL-STD-202, Method 208
• Polarity: Cathode Band
• Weight: 0.005 grams (approximate)
1 = Cathode
1
2 _{2 = Anode}
Device Schematic
Ordering Information (Note 4)
Part Number
SD05-7
Case
SOD323
Packaging
3000/Tape & Reel
Marking Information
ZA
ZA = Product type marking code
Thermal Characteristics
Characteristic
Peak Pulse Power (tp = 8x20μs)
Thermal Resistance, Junction to Ambient
Operating and Storage Temperature Range
(Note 5) T_A = +25°C
(Note 5) T_A = +25°C
Symbol
P_pk
R_θJA
T_J, T_STG
Value
350
625
-55 to +150
Unit
W
°C/W
°C
Electrical Characteristics (@T_A = +25°C, unless otherwise specified.)
Reverse
Standoff
Voltage
Breakdown
Voltage
V_BR @ I_T
V_RWM (V) Min (V) Max (V)
5
6.2
7.3
Test
Current
I_T (mA)
1.0
Max. Reverse
Leakage @ V_RWM
(Note 6)
I_R (μA)
10
Max. Clamping
Voltage @ I_PP = 5A
(Note 7)
V_C (V)
9.8
Max. Clamping Voltage
V_C @ I_PP (Note 7)
V_C (V)
14.5
I_PP (A)
24
Total Max
Capacitance C_T
V_R = 0V
f = 1MHz
(pF)
350
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. For packaging details, go to our website at http://www.diodes.com.
5. Device mounted on FR-4 PC board with suggested pad layout, which can be found on our website at http://www.diodes.com Measured across pin 1 and
pin 2.
6. Short duration pulse test used to minimize self-heating effect.
7. Clamping voltage value is based on an 8x20μs peak pulse current (I_pp) waveform.
SD05
Document number: DS31594 Rev. 5 - 2
1 of 4
www.diodes.com
November 2012
© Diodes Incorporated