SBR8U60P5 Datasheet, PDF (1/4 Pages) Diodes Incorporated – 8A SBR® SUPER BARRIER RECTIFIER PowerDI®5

Features
• Ultra Low Forward Voltage Drop
• Patented Super Barrier Rectifier Technology
• Soft, Fast Switching Capability
• 150ºC Operating Junction Temperature
• Lead Free Finish, RoHS Compliant (Note 1)
• “Green” Molding Compound (No Br, Sb)
Top View
Bottom View
SBR8U60P5
8A SBR^®
SUPER BARRIER RECTIFIER
PowerDI^®5
Please click here to visit our online spice models database.
Mechanical Data
• Case: PowerDI^®5
• Case Material: Molded Plastic, “Green” Molding compound.
UL Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020D
• Terminals: Finish - Matte Tin annealed over Copper leadframe.
Solderable per MIL-STD-202, Method 208
• Polarity: See Below
• Marking Information: See Page 2
• Ordering Information: See Page 2
• Weight: 0.093 grams (approximate)
LEFT PIN
RIGHT PIN
BOTTOMSIDE
HEAT SINK
Note: Pins Left & Right must
be electrically connected
at the printed circuit board.
Maximum Ratings @T_A = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
V_RRM
Working Peak Reverse Voltage
DC Blocking Voltage
V_RWM
60
V
V_RM
Average Rectified Output Current @T_C = 140ºC
I_O
8
A
Non-Repetitive Peak Forward Surge Current 8.3ms
Single Half Sine-Wave Superimposed on Rated Load
I_FSM
280
A
Thermal Characteristics
Characteristic
Maximum Thermal Resistance
Thermal Resistance Junction to Soldering (Note 2)
Thermal Resistance Junction to Ambient (Note 3)
Operating and Storage Temperature Range
Symbol
R_θJS
R_θJA
T_J, T_STG
Value
3
60
-65 to +150
Unit
ºC/W
ºC
Electrical Characteristics @T_A = 25°C unless otherwise specified
Characteristic
Forward Voltage Drop
Leakage Current (Note 4)
Symbol
V_F
I_R
Min
Typ Max Unit
Test Condition
-
0.30 0.35
I_F = 1.0A, T_J = 25ºC
-
0.46 0.53
V I_F = 8A, T_J = 25ºC
-
-
0.5
I_F = 8A, T_J = 125ºC
-
-
0.12 0.6
-
100
mA ^{VR = 60V, TJ = 25ºC}
V_R = 60V, T_J = 125ºC
Notes:
1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at http://www.diodes.com/products/lead_free.html.
2. Theoretical R_θJS calculated from the top center of the die straight down to the PCB cathode tab solder junction.
3. Polymide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf.
4. Short duration pulse test used to minimize self-heating effect.
SBR and PowerDI are registered trademarks of Diodes Incorporated.
SBR8U60P5
Document number: DS31731 Rev. 3 - 2
1 of 4
www.diodes.com
April 2009
© Diodes Incorporated