SBR1U200P1_15 Datasheet, PDF (1/4 Pages) Diodes Incorporated – 1.0A SBR® SURFACE MOUNT SUPER BARRIER RECTIFIER PowerDI®123

Features
• Ultra Low Forward Voltage Drop
• Low Leakage Current
• Superior Reverse Avalanche Capability
• Excellent High Temperature Stability
• Patented Interlocking Clip Design for High Surge Current
Capacity
• Patented Super Barrier Rectifier Technology
• Soft, Fast Switching Capability
• 150ºC Operating Junction Temperature
• Lead Free Finish, RoHS Compliant (Note 1)
• “Green” Molding Compound (No Br, Sb)
SBR1U200P1
1.0A SBR^®
SURFACE MOUNT SUPER BARRIER RECTIFIER
PowerDI^®123
Mechanical Data
• Case: PowerDI^®123
• Case Material: Molded Plastic, “Green” Molding Compound.
UL Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020
• Polarity Indicator: Cathode Band
• Terminals: Finish - Matte Tin annealed over Copper leadframe.
Solderable per MIL-STD-202, Method 208
• Marking Information: See Page 3
• Ordering Information: See Page 3
• Weight: 0.018 grams (approximate)
Top View
Maximum Ratings @T_A = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Average Rectified Output Current (See Figure 1)
Non-Repetitive Peak Forward Surge Current 8.3ms
Single Half Sine-Wave Superimposed on Rated Load
Symbol
V_RRM
V_RWM
V_RM
I_O
I_FSM
Value
200
1.0
40
Unit
V
A
A
Thermal Characteristics
Characteristic
Maximum Thermal Resistance Junction to Ambient (Note 2)
Maximum Thermal Resistance Junction to Ambient (Note 3)
Operating and Storage Temperature Range
Symbol
R_θJA
R_θJA
T_J, T_STG
Value
217
138
-65 to +175
Unit
ºC/W
ºC/W
ºC
Electrical Characteristics @T_A = 25°C unless otherwise specified
Characteristic
Forward Voltage
Reverse Current (Note 4)
Reverse Recovery Time
Symbol
Min
V_F
-
-
I_R
-
t_rr
-
Typ
0.75
0.60
-
-
Max
0.82
0.68
50
25
Unit
V
μA
ns
Test Condition
I_F = 1.0A, T_J = 25ºC
I_F = 1.0A, T_J = 125ºC
V_R = 200V, T_J = 25ºC
I_F = 0.5A, I_R = 1A,
I_RR = 0.25A,
Notes:
1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes.
2. FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf.
3. Polymide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf.
4. Short duration pulse test used to minimize self-heating effect.
SBR and PowerDI are registered trademarks of Diodes Incorporated.
SBR1U200P1
Document number: DS32093 Rev. 2 - 2
1 of 4
www.diodes.com
August 2010
© Diodes Incorporated