SBR10U200P5 Datasheet, PDF (1/3 Pages) Diodes Incorporated – 10.0A SBR® SUPER BARRIER RECTIFIER PowerDI®5

Features
• Ultra Low Forward Voltage Drop
• Excellent High Temperature Stability
• Patented Super Barrier Rectifier Technology
• Soft, Fast Switching Capability
• 175ºC Operating Junction Temperature
• Lead Free Finish, RoHS Compliant (Note 1)
• “Green” Molding Compound (No Br, Sb)
SBR10U200P5
10.0A SBR^®
SUPER BARRIER RECTIFIER
PowerDI^®5
Please click here to visit our online spice models database.
Mechanical Data
• Case: PowerDI^®5
• Case Material: Molded Plastic, “Green” Molding Compound.
UL Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020D
• Terminals: Matte Tin Finish annealed over Copper leadframe.
Solderable per MIL-STD-202, Method 208
• Polarity: See Diagram
• Marking Information: See Page 3
• Ordering Information: See Page 3
• Weight: 0.093 grams (approximate)
Top View
Bottom View
LEFT PIN
RIGHT PIN
BOTTOMSIDE
HEAT SINK
Note: Pins Left & Right must
be electrically connected
at the printed circuit board.
Maximum Ratings @T_A = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V_RRM
V_RWM
200
V
V_RM
Average Rectified Output Current (See Figure 1)
I_O
10
A
Non-Repetitive Peak Forward Surge Current 8.3ms
Single Half Sine-Wave Superimposed on Rated Load
I_FSM
180
A
Thermal Characteristics
Characteristic
Maximum Thermal Resistance Junction to Ambient (Note 2)
Operating and Storage Temperature Range
Symbol
R_θJA
T_J, T_STG
Value
77
-65 to +175
Unit
ºC/W
ºC
Electrical Characteristics @T_A = 25°C unless otherwise specified
Characteristic
Forward Voltage Drop
Leakage Current (Note 5)
Symbol
Min
-
V_F
-
-
I_R
-
Typ
0.75
0.62
0.83
-
0.18
Max
0.82
0.67
0.88
0.1
10
Unit
V
mA
Test Condition
I_F = 5A, T_J = 25ºC
I_F = 5A, T_J = 125ºC
I_F = 10A, T_J = 25ºC
V_R = 200V, T_J = 25ºC
V_R = 200V, T_J = 125ºC
Notes:
1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at http://www.diodes.com/products/lead_free.html.
2. Polymide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf.
3. Short duration pulse test used to minimize self-heating effect.
SBR and PowerDI are registered trademarks of Diodes Incorporated.
SBR10U200P5
Document number: DS31234 Rev. 4 - 2
1 of 3
www.diodes.com
March 2009
© Diodes Incorporated