SBR1045SP5 Datasheet, PDF (1/3 Pages) Diodes Incorporated – 10A SBR® SUPER BARRIER RECTIFIER PowerDI®5

SBR1045SP5
10A SBR^®
SUPER BARRIER RECTIFIER
PowerDI^®5
Features
• Designed as Bypass Diodes for Solar Panels
• Selectively Rated for 200ºC Maximum Junction Temperature
for High Thermal Reliability
• Patented Super Barrier Rectifier Technology
• Low Forward Voltage Drop
• Excellent High Temperature Stability
• Lead Free Finish, RoHS Compliant (Note 2)
Mechanical Data
• Case: PowerDI^®5
• Case Material: Molded Plastic, “Green” Molding Compound.
UL Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020D
• Terminals: Finish – Matte Tin annealed over Copper
leadframe. Solderable per MIL-STD-202, Method 208
• Marking Information: See Page 3
• Ordering Information: See Page 3
• Weight: 0.093 grams (approximate)
Top View
Bottom View
LEFT PIN
RIGHT PIN
BOTTOMSIDE
HEAT SINK
Note: Pins Left & Right must
be electrically connected
at the printed circuit board.
Maximum Ratings @T_A = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V_RRM
V_RWM
45
V
V_RM
RMS Reverse Voltage
V_R(RMS)
32
V
Average Rectified Output Current
I_O
10
A
Non-Repetitive Peak Forward Surge Current 8.3ms
Single Half Sine-Wave Superimposed on Rated Load
I_FSM
180
A
Thermal Characteristics
Characteristic
Typical Thermal Resistance
Thermal Resistance Junction to Lead
Thermal Resistance Junction to Ambient (Note 3)
Thermal Resistance Junction to Ambient (Note 4)
Operating Temperature Range
Storage Temperature Range
V_R ≤ 80% V_RRM
V_R ≤ 50% V_RRM
DC Forward Mode
Symbol
R_θJL
R_θJA
R_θJA
T_J
T_STG
Value
3
102
60
-65 to +150
≤180
≤200
-65 to +175
Unit
ºC/W
ºC
ºC
Electrical Characteristics @T_A = 25°C unless otherwise specified
Characteristic
Symbol
Min
Reverse Breakdown Voltage (Note 1)
V_(BR)R
45
-
Forward Voltage Drop
V_F
-
-
Leakage Current (Note 1)
-
I_R
-
-
Typ
-
-
0.49
0.47
0.03
-
17
Max
-
0.51
0.55
0.53
0.45
18
100
Unit
V
V
mA
Test Condition
I_R = 0.5mA
I_F = 8A, T_J = 25ºC
I_F = 10A, T_J = 25ºC
I_F = 10A, T_J = 125ºC
V_R = 45V, T_J = 25ºC
V_R = 45V, T_J = 100ºC
V_R = 45V, T_J = 150ºC
Notes:
1. Short duration pulse test used to minimize self-heating effect.
2. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes.
3. FR-4 PCB, 2oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf.
4. Polymide PCB, 2oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf.
SBR and PowerDI are registered trademarks of Diodes Incorporated.
SBR1045SP5
Document number: DS31370 Rev. 3 - 2
1 of 3
www.diodes.com
October 2008
© Diodes Incorporated