|
SBR05M60BLP_15 Datasheet, PDF (1/4 Pages) Diodes Incorporated – 0.5A SBR® BRIDGE SUPER BARRIER RECTIFIER | |||
|
Features
⢠Ultra Low Leakage Current
⢠Excellent High Temperature Stability
⢠Patented Super Barrier Rectifier Technology
⢠Soft, Fast Switching Capability
⢠150ºC Operating Junction Temperature
⢠Lead Free Finish, RoHS Compliant (Note 1)
⢠âGreenâ Device (Note 3)
SBR05M60BLP
0.5A SBR® BRIDGE
SUPER BARRIER RECTIFIER
Mechanical Data
⢠Case: DFN3030-4
⢠Case Material: Molded Plastic âGreenâ Molding Compound,
UL Flammability Classification Rating 94V-0
⢠Moisture Sensitivity: Level 1 per J-STD-020
⢠Terminals: Finish â NiPdAu Over Copper Lead Frame,
Solderable per MIL-STD-202, Method 208
⢠Polarity: See Diagram
⢠Marking Information: See Page 3
⢠Ordering Information: See Page 3
⢠Weight: 0.02 grams (approximate)
1
4
1
N/C 4
2
3
2
3
Top View
Device Schematic
Top View
Pin Configuration
Maximum Ratings @TA = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
60
V
VRM
Average Rectified Output Current
IO
500
mA
Non-Repetitive Peak Forward Surge Current 8.3ms
Single Half Sine-Wave Superimposed on Rated Load (Per Diode)
IFSM
8
A
Thermal Characteristics
Characteristic
Thermal Resistance Junction to Ambient Air (Note 2)
Operating and Storage Temperature Range
Symbol
RθJA
TJ, TSTG
Typ
Max
215
-
-55 to +150
Unit
°C/W
°C
Electrical Characteristics @TA = 25°C unless otherwise specified
Characteristic
Symbol
Min
Typ
Max
Unit
Forward Voltage (Per Diode)
-
0.42
VF
-
0.43
0.49
V
0.40
0.46
Reverse Current (Note 4) (Per Diode)
IR
-
17
100
µA
2.8
20
mA
Notes:
1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes.
2. Polymide PCB, 2 oz. copper; minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf.
3. Diodes Inc.âs âGreenâ policy can be found on our website at http://www.diodes.com/products/lead_free/index.php
4. Short duration pulse test used to minimize self-heating effect.
Test Condition
IF = 0.25A, TJ = 25ºC
IF = 0.5A, TJ = 25ºC
IF = 0.5A, TJ = 125ºC
VR = 60V, TJ = 25ºC
VR = 60V, TJ = 125ºC
SBR is a registered trademark of Diodes Incorporated.
SBR05M60BLP
Document number: DS31771 Rev. 2 - 2
1 of 4
www.diodes.com
June 2010
© Diodes Incorporated
|
▷ |