SBR05M60BLP Datasheet, PDF (1/4 Pages) Diodes Incorporated – SUPER BARRIER RECTIFIER

Features
• Ultra Low Leakage Current
• Excellent High Temperature Stability
• Patented Super Barrier Rectifier Technology
• Soft, Fast Switching Capability
• 150ºC Operating Junction Temperature
• Lead Free Finish, RoHS Compliant (Note 1)
• “Green” Device (Note 3)
SBR05M60BLP
0.5A SBR^® BRIDGE
SUPER BARRIER RECTIFIER
Mechanical Data
• Case: DFN3030-4
• Case Material: Molded Plastic “Green” Molding Compound,
UL Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020
• Terminals: Finish – NiPdAu Over Copper Lead Frame,
Solderable per MIL-STD-202, Method 208
• Polarity: See Diagram
• Marking Information: See Page 3
• Ordering Information: See Page 3
• Weight: 0.02 grams (approximate)
1
4
1
N/C ₄
2
3
2
3
Top View
Device Schematic
Top View
Pin Configuration
Maximum Ratings @T_A = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V_RRM
V_RWM
60
V
V_RM
Average Rectified Output Current
I_O
500
mA
Non-Repetitive Peak Forward Surge Current 8.3ms
Single Half Sine-Wave Superimposed on Rated Load (Per Diode)
I_FSM
8
A
Thermal Characteristics
Characteristic
Thermal Resistance Junction to Ambient Air (Note 2)
Operating and Storage Temperature Range
Symbol
R_θJA
T_J, T_STG
Typ
Max
215
-
-55 to +150
Unit
°C/W
°C
Electrical Characteristics @T_A = 25°C unless otherwise specified
Characteristic
Symbol
Min
Typ
Max
Unit
Forward Voltage (Per Diode)
-
0.42
V_F
-
0.43
0.49
V
0.40
0.46
Reverse Current (Note 4) (Per Diode)
I_R
-
17
100
µA
2.8
20
mA
Notes:
1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes.
2. Polymide PCB, 2 oz. copper; minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf.
3. Diodes Inc.’s “Green” policy can be found on our website at http://www.diodes.com/products/lead_free/index.php
4. Short duration pulse test used to minimize self-heating effect.
Test Condition
I_F = 0.25A, T_J = 25ºC
I_F = 0.5A, T_J = 25ºC
I_F = 0.5A, T_J = 125ºC
V_R = 60V, T_J = 25ºC
V_R = 60V, T_J = 125ºC
SBR is a registered trademark of Diodes Incorporated.
SBR05M60BLP
Document number: DS31771 Rev. 2 - 2
1 of 4
www.diodes.com
June 2010
© Diodes Incorporated