SBR02U100LP Datasheet, PDF (1/4 Pages) Diodes Incorporated – 0.2A SBR® Surface Mount Super Barrier Rectifier

Features
• Ultra Low Forward Voltage Drop
• Superior Reverse Avalanche Capability
• Patented Super Barrier Rectifier Technology
• Soft, Fast Switching Capability
• 150ºC Operating Junction Temperature
• Lead Free Finish, RoHS Compliant (Note 1)
• “Green” Molding Compound (No Br, Sb)
• Qualified to AEC-Q101 Standards for High Reliability
Please click here to visit our online spice models database.
SBR02U100LP
0.2A SBR^®
Surface Mount Super Barrier Rectifier
Mechanical Data
• Case: DFN1006-2
• Case Material: Molded Plastic, “Green” Molding
Compound. UL Flammability Classification Rating
94V-0
• Moisture Sensitivity: Level 1 per J-STD-020C
• Terminal Connections: Cathode Dot
• Terminals: Finish - NiPdAu over Copper
leadframe. Solderable per MIL-STD-202, Method
208
• Marking Information: See Page 3
• Ordering Information: See Page 3
• Weight: 0.001 grams
Maximum Ratings @ T_A = 25ºC unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Average Rectified Output Current (See Figure 1)
Non-Repetitive Peak Forward Surge Current 8.3ms
Single Half Sine-Wave Superimposed on Rated Load
Maximum Thermal Resistance
Thermal Resistance, Junction to Ambient (Note 2) T_A = 25ºC
Thermal Resistance, Junction to Ambient (Note 3) T_A = 25ºC
Symbol
V_RRM
V_RWM
V_RM
V_R(RMS)
I_O
I_FSM
R_θJA
R_θJA
Operating and Storage Temperature Range
T_j, T_STG
Value
100
70
250
5
270
235
-65 to +150
Unit
V
V
mA
A
ºC/W
ºC
Electrical Characteristics @ T_A = 25ºC unless otherwise specified
Characteristic
Symbol
Min
Typ
Max
Unit
Test Condition
Reverse Breakdown Voltage (Note 4) V_(BR)R
100
-
-
V
I_R = 1mA
Forward Voltage Drop
0.67
0.72
I_F = 100mA, T_j = 25ºC
V_F
-
0.76
0.80
V
I_F = 200mA, T_j = 25ºC
0.60
0.65
I_F = 200mA, T_j = 125ºC
Leakage Current (Note 4)
I_R
-
0.04
1.0
6
50
µA
V_R = 75V, T_j = 25ºC
V_R = 75V, T_j = 85ºC
Notes:
1. RoHS revision 13.2.2003. High temperature solder exemption applied, see EU Directive Annex Note 7.
2. FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf
3. Polyimide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf
4. Short duration pulse test used to minimize self-heating effect.
SBR is a registered trademark of Diodes Incorporated.
SBR02U100LP Rev. 4 – 2
1 of 4
www.diodes.com
October 2007
© Diodes Incorporated