SBR02M30LP_15 Datasheet, PDF (1/3 Pages) Diodes Incorporated – SUPER BARRIER RECTIFIER 0.2A SBR®

Features
• Ultra Low Leakage Current
• Excellent High Temperature Stability
• Patented Super Barrier Rectifier Technology
• Soft, Fast Switching Capability
• 175ºC Operating Junction Temperature
• Lead Free Finish, RoHS Compliant (Note 1)
• “Green” Molding Compound (No Br, Sb)
• Qualified to AEC-Q101 Standards for High Reliability
SBR02M30LP
0.2A SBR^®
SUPER BARRIER RECTIFIER
Mechanical Data
• Case: DFN1006-2
• Case Material: Molded Plastic, “Green” Molding Compound.
UL Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020D
• Polarity Indicator: Cathode Dot
• Terminals: Finish - NiPdAu over Copper leadframe. Solderable
per MIL-STD-202, Method 208
• Marking Information: See Page 3
• Ordering Information: See Page 3
• Weight: 0.001 grams (Approximate)
Top View
Bottom View
Maximum Ratings @T_A = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V_RRM
V_RWM
30
V
V_RM
RMS Reverse Voltage
V_R(RMS)
21
V
Average Rectified Output Current (See Figure 1)
I_O
0.2
A
Non-Repetitive Peak Forward Surge Current 8.3ms
Single Half Sine-Wave Superimposed on Rated Load
I_FSM
5.0
A
Thermal Characteristics
Characteristic
Maximum Thermal Resistance
Thermal Resistance Junction to Soldering (Note 2)
Thermal Resistance Junction to Ambient (Note 3)
Operating and Storage Temperature Range
Symbol
R_θJS
R_θJA
T_J, T_STG
Value
18
263
-65 to +175
Unit
ºC/W
ºC
Electrical Characteristics @T_A = 25°C unless otherwise specified
Characteristic
Symbol
Min
Typ
Max
Unit
Test Condition
Reverse Breakdown Voltage (Note 4)
V_(BR)R
30
Forward Voltage Drop
V_F
-
Leakage Current (Note 4)
I_R
-
-
-
0.50
0.54
0.42
0.45
0.57
0.61
0.51
0.54
0.1
0.5
46
150
V
I_R = 400µA
I_F = 0.1A, T_J = 25ºC
V
I_F = 0.1A, T_J = 150ºC
I_F = 0.2A, T_J = 25ºC
I_F = 0.2A, T_J = 150ºC
µA
V_R = 30V, T_J = 25ºC
V_R = 30V, T_J = 150ºC
Notes:
1. RoHS revision 13.2.2003. High temperature solder exemption applied, see EU Directive Annex Note 7.
2. Theoretical R_θJS calculated from the top center of the die straight down to the PCB cathode tab solder junction.
3. FR-4 PCB, 2oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf.
4. Short duration pulse test used to minimize self-heating effect.
SBR is a registered trademark of Diodes Incorporated.
SBR02M30LP
Document number: DS31061 Rev. 5 - 2
1 of 3
www.diodes.com
March 2008
© Diodes Incorporated