SBR0240LP Datasheet, PDF (1/4 Pages) Diodes Incorporated – 0.2A SBR SURFACE MOUNT SUPER BARRIER RECTIFIER

Features
• Ultra Low Forward Voltage Drop
• Superior Reverse Avalanche Capability
• Patented Super Barrier Rectifier Technology
• Soft, Fast Switching Capability
• 150ºC Operating Junction Temperature
• Lead Free Finish, RoHS Compliant (Note 1)
• “Green” Molding Compound (No Br, Sb)
• Qualified to AEC-Q101 Standards for High Reliability
SBR0240LP
0.2A SBR^®
SURFACE MOUNT SUPER BARRIER RECTIFIER
Please click here to visit our online spice models database.
Mechanical Data
• Case: DFN1006-2
• Case Material: Molded Plastic, “Green” Molding Compound.
UL Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020D
• Terminal Connections: Cathode Dot
• Terminals: Finish - NiPdAu over Copper leadframe. Solderable
per MIL-STD-202, Method 208
• Marking Information: See Page 3
• Ordering Information: See Page 3
• Weight: 0.001 grams (approximate)
Top View
Bottom View
Maximum Ratings @T_A = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V_RRM
V_RWM
40
V
V_RM
Average Rectified Output Current (See Figure 1)
I_O
250
mA
Non-Repetitive Peak Forward Surge Current 8.3ms
Single Half Sine-Wave Superimposed on Rated Load
I_FSM
5
A
Thermal Characteristics
Characteristic
Typical Thermal Resistance, Junction to Ambient T_A = 25ºC (Note 3)
Operating and Storage Temperature Range
Symbol
R_θJA
T_J, T_STG
Value
270
-65 to +150
Unit
ºC/W
ºC
Electrical Characteristics @T_A = 25°C unless otherwise specified
Characteristic
Symbol
Min
Typ
Max
Unit
Test Condition
Forward Voltage Drop
Leakage Current (Note 2)
-
0.15
0.21
-
0.22
0.28
I_F = 0.1mA, T_J = 25ºC
I_F = 1.0mA, T_J = 25ºC
V_F
-
-
0.29
0.35
0.41
0.49
V
I_F = 10mA, T_J = 25ºC
I_F = 100mA, T_J = 25ºC
-
0.49
0.59
I_F = 200mA, T_J = 25ºC
-
0.47
0.56
I_F = 200mA, T_J = 125ºC
I_R
-
0.5
0.6
-
10
µA
V_R = 25V, T_J = 25ºC
V_R = 40V, T_J = 25ºC
Notes:
1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at http://www.diodes.com/products/lead_free.html.
2. Short duration pulse test used to minimize self-heating effect.
3. FR-4 PCB, 2oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf.
SBR is a registered trademark of Diodes Incorporated.
SBR0240LP
Document number: DS31774 Rev. 3 - 2
1 of 4
www.diodes.com
June 2009
© Diodes Incorporated