SBG1630CT_1 Datasheet, PDF (1/3 Pages) Diodes Incorporated – 16A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER

SPICE MODELS: SBG1630CT SBG1635CT SBG1640CT SBG1645CT
SBG1630CT - SBG1645CT
16A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
Features
· Guard Ring Die Construction for Transient Protection
· Low Power Loss, High Efficiency
· High Surge Capability
· High Current Capability and Low Forward Voltage Drop
· Surge Overload Rating to 175A Peak
· For Use in Low Voltage, High Frequency Inverters, Free
Wheeling, and Polarity Protection Applications
· Lead Free Finish/RoHS Compliant (Note 3)
Mechanical Data
· Case: D²PAK
· Case Material: Molded Plastic. UL Flammability
Classification Rating 94V-0
· Moisture Sensitivity: Level 1 per J-STD-020C
· Terminals: Finish - Tin. Solderable per MIL-STD-202,
Method 208 e3
· Ordering Information on Page 2
· Polarity: See Diagram
· Marking: Type Number
· Weight: 1.7 grams (approximate)
E
A
4
B
123
G
H
J
D
PIN 1
PIN 3
M
K
C
L
PIN 2 & 4
D²PAK
Dim Min Max
A
9.65 10.69
B 14.60 15.88
C
0.51 1.14
D
2.29 2.79
E
4.37 4.83
G
1.14 1.40
H
1.14 1.40
J
8.25 9.25
K
0.30 0.64
L
2.03 2.92
M
2.29 2.79
All Dimensions in mm
Maximum Ratings and Electrical Characteristics ^{@ TA = 25°C unless otherwise specified}
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic
Symbol
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage (Note 4)
RMS Reverse Voltage
Average Rectified Output Current
@ TC = 95°C
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave superimposed on rated load
Forward Voltage, per Element
@ I_F = 8.0A
Peak Reverse Current
at Rated DC Blocking Voltage (Note 4)
Typical Total Capacitance (Note 2)
@ T_j = 25°C
@ Tj = 125°C
Typical Thermal Resistance Junction to Case (Note 1)
Operating and Storage Temperature Range
VRRM
VRWM
V_R
V_R(RMS)
I_O
I_FSM
V_FM
I_RM
C_T
RqJC
T_j, T_STG
SBG
1630CT
30
21
SBG
1635CT
SBG
1640CT
35
40
25
28
16
175
0.55
1.0
50
275
3.0
-65 to +125
SBG
1645CT
45
32
Unit
V
V
A
A
V
mA
pF
°C/W
°C
Notes:
1. Thermal resistance: junction to case mounted on heat sink.
2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC, per element.
3. RoHS revision 13.2.2003. High Temperature Solder Exemption Applied, see EU Directive Annex Note 7.
4. Short duration pulse test used to minimize self-heating effect.
DS30090 Rev. 5 - 2
1 of 3
www.diodes.com
SBG1630CT - SBG1645CT
ã Diodes Incorporated