PR3001G_1 Datasheet, PDF (1/3 Pages) Diodes Incorporated – 3.0A FAST RECOVERY GLASS PASSIVATED RECTIFIER

PR3001G - PR3007G
3.0A FAST RECOVERY GLASS PASSIVATED RECTIFIER
Features
· Glass Passivated Die Construction
· Fast Switching for High Efficiency
· Surge Overload Rating to 125A Peak
· Low Reverse Leakage Current
· Lead Free Finish, RoHS Compliant (Note 4)
A
B
A
Mechanical Data
C
D
· Case: DO-201AD
· Case Material: Molded Plastic. UL Flammability
Classification Rating 94V-0
· Moisture Sensitivity: Level 1 per J-STD-020C
· Terminals: Finish ¾ Tin. Plated Leads Solderable per
MIL-STD-202, Method 208 e3
· Polarity: Cathode Band
· Marking: Type Number
· Ordering Information: See Last Page
· Weight: 1.12 grams (approximate)
DO-201AD
Dim
Min
Max
A
25.40
¾
B
7.20
9.50
C
1.20
1.30
D
4.80
5.30
All Dimensions in mm
Maximum Ratings and Electrical Characteristics ^{@ TA = 25°C unless otherwise specified}
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic
Symbol
PR
3001G
PR
3002G
PR
3003G
PR
3004G
PR
3005G
PR
3006G
PR
3007G
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage (Note 5)
VRRM
VRWM
50
100 200 400 600 800 1000 V
V_R
RMS Reverse Voltage
V_R(RMS) 35
70
140 280 420 560 700 V
Average Rectified Output Current
(Note 1)
@ T_A = 55°C
I_O
3.0
A
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave Superimposed on Rated Load
I_FSM
125
A
Forward Voltage
@ IF = 3.0A V_FM
1.3
V
Peak Reverse Current
at Rated DC Blocking Voltage (Note 5)
@ TA = 25°C
@ T_A = 125°C
IRM
5.0
100
mA
Reverse Recovery Time (Note 3)
t_rr
150
250
500
ns
Typical Total Capacitance (Note 2)
C_T
50
pF
Typical Thermal Resistance Junction to Ambient
R_qJA
32
°C/W
Operating and Storage Temperature Range
Tj, TSTG
-65 to +150
°C
Notes:
1. Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case.
2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
3. Measured with I_F = 0.5A, I_R = 1A, I_rr = 0.25A. See figure 5.
4. RoHS revision 13.2.2003. Glass and high temperature solder exemptions applied, see EU Directive Annex Notes 5 and 7.
5. Short duration pulse test used to minimize self-heating effect.
DS27003 Rev. 6 - 2
1 of 3
www.diodes.com
PR3001G - PR3007G
ã Diodes Incorporated