PR2001G_1 Datasheet, PDF (1/3 Pages) Diodes Incorporated – 2.0A FAST RECOVERY GLASS PASSIVATED RECTIFIER

PR2001G - PR2007G
2.0A FAST RECOVERY GLASS PASSIVATED RECTIFIER
Features
· Glass Passivated Die Construction
· Fast Switching for High Efficiency
· Surge Overload Rating to 80A Peak
· Low Reverse Leakage Current
· Lead Free Finish, RoHS Compliant (Note 4)
Mechanical Data
· Case: DO-15
· Case Material: Molded Plastic. UL Flammability Classification
Rating 94V-0
· Moisture Sensitivity: Level 1 per J-STD-020C
· Terminals: Finish – Tin. Solderable per MIL-STD-202,
Method 208 e3
· Polarity: Cathode Band
· Marking: Type Number
· Ordering Information: See Page 3
· Weight: 0.4 grams (approximate)
A
B
A
C
D
DO-15
Dim
Min
Max
A
25.40
¾
B
5.50
7.62
C
0.686
0.889
D
2.60
3.60
All Dimensions in mm
Maximum Ratings and Electrical Characteristics ^{@ TA = 25°C unless otherwise specified}
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic
Symbol
PR
2001G
PR
2002G
PR
2003G
PR
2004G
PR
2005G
PR
2006G
PR
2007G
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage (Note 5)
V_RRM
V_RWM
50
100 200 400 600 800 1000 V
VR
RMS Reverse Voltage
V_R(RMS) 35
70
140 280 420 560 700 V
Average Rectified Output Current
(Note 1)
@ TA = 55°C
IO
2.0
A
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave Superimposed on Rated Load
I_FSM
80
A
Forward Voltage Drop
@ I_F = 2.0A V_FM
1.3
V
Peak Reverse Current
at Rated DC Blocking Voltage (Note 5)
@ T_A = 25°C
@ TA = 100°C
I_RM
5.0
100
mA
Reverse Recovery Time (Note 3)
t_rr
150
250
500
ns
Typical Total Capacitance (Note 2)
CT
35
pF
Typical Thermal Resistance Junction to Ambient
R_qJA
50
°C/W
Operating and Storage Temperature Range
T_j, T_STG
-65 to +150
°C
Notes:
1. Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case.
2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
3. Measured with I_F = 0.5A, I_R = 1.0A, I_rr = 0.25A. See figure 5.
4. RoHS revision 13.2.2003. Glass and high temperature solder exemptions applied, see EU Directive Annex Notes 5 and 7.
5. Short duration pulse test used to minimize self-heating effect.
DS27005 Rev. 4 - 2
1 of 3
www.diodes.com
PR2001G - PR2007G
ã Diodes Incorporated