PDU340 Datasheet, PDF (1/4 Pages) Diodes Incorporated – 3A ULTRA-FAST RECOVERY RECTIFIER

Features
· Glass Passivated Die Construction
· Ultra-Fast Recovery Time for High Efficiency
· High Maximum Junction Temperature
· For Use in High Frequency Inverters, Free Wheeling, and
Polarity Protection Applications
· High Forward Surge Current Capability
· Lead Free Finish, RoHS Compliant (Note 1)
· "Green" Molding Compound (No Br, Sb)
· Qualified to AEC-Q101 Standards for High Reliability
SPICE MODEL: PDU340
PDU340
3A ULTRA-FAST RECOVERY RECTIFIER
PowerDI ^ä5
Mechanical Data
· Case: PowerDI^ä5
· Case Material: Molded Plastic, “Green” Molding
Compound. UL Flammability Classification Rating 94V-0
· Moisture sensitivity: Level 1 per J-STD-020C
· Terminals: Finish – Matte Tin annealed over Copper
leadframe. Solderable per MIL-STD-202, Method 208 e3
· Polarity: See Diagram on Page 4
· Marking: See Page 3
· Weight: 0.094 grams (approx.)
TOP VIEW
Maximum Ratings ^{@ T}A ^{= 25°C unless otherwise specified}
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Average Rectified Output Current (See also figure 4)
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave Superimposed on Rated Load
Symbol
V_RRM
V_RWM
V_R
V_R(RMS)
I_O
I_FSM
BOTTOM VIEW
Value
400
283
3
55
Thermal Characteristics
Characteristic
Thermal Resistance Junction to Soldering Point
Thermal Resistance Junction to Ambient Air (Note 2)
Thermal Resistance Junction to Ambient Air (Note 3)
Thermal Resistance Junction to Ambient Air (Note 4)
Operating Temperature Range
Storage Temperature Range
TA = 25°C
TA = 25°C
TA = 25°C
Symbol
R_qJS
RqJA
RqJA
RqJA
T_j
TSTG
Typ
Max
¾
5
100
¾
60
¾
40
¾
-65 to +175
-65 to +175
Notes:
1. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7.
2. FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf.
3. Polymide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf.
4. Polymide PCB, 2 oz. Copper. Cathode pad dimensions 9.4mm x 7.2mm. Anode pad dimensions 2.7mm x 1.6mm.
Unit
V
V
A
A
Unit
°C/W
°C/W
°C/W
°C/W
°C
°C
DS30758 Rev. 2 - 2
PowerDI is a trademark of Diodes Incorporated.
1 of 4
www.diodes.com
PDU340
ã Diodes Incorporated