PDS835L Datasheet, PDF (1/3 Pages) Diodes Incorporated – 8A LOW VF SCHOTTKY BARRIER RECTIFIER

SPICE MODEL: PDS835L
PDS835L
8A LOW VF SCHOTTKY BARRIER RECTIFIER
PowerDI ^ä5
Features
· Guard Ring Die Construction for
Transient Protection
· Low Forward Voltage Drop
· For Use in Low Voltage, High Frequency Inverters, Free
Wheeling, and Polarity Protection Applications
· High Forward Surge Current Capability
· Lead Free Finish, RoHS Compliant (Note 1)
· "Green" Molding Compound (No Br, Sb)
· Qualified to AEC-Q101 Standards for High Reliability
Mechanical Data
· Case: PowerDI^ä5
· Case Material: Molded Plastic, “Green” Molding
Compound. UL Flammability Classification Rating 94V-0
· Moisture Sensitivity: Level 1 per J-STD-020C
· Terminals: Finish – Matte Tin annealed over Copper
leadframe. Solderable per MIL-STD-202, Method 208 e3
· Polarity: See Diagram
· Marking: See Page 3
· Weight: 0.094 grams (approximate)
D
b2
L1
A
A2
E
E1
L1
e
b1
b1
A2
D
D2
b2
L
E2 _E
W
L1
e
b1
b1
LEFT PIN
RIGHT PIN
BOTTOMSIDE
HEAT SINK
Note: Pins Left & Right must
be electrically connected
at the printed circuit board.
PowerDI^ä5
Dim Min
Max
A
1.05
1.15
A2 0.33 0.43
b1 0.80 0.99
b2 1.70 1.88
D
3.90
4.05
D2
3.05 NOM
E
6.40 6.60
e
1.84 NOM
E1 5.30 5.45
E2
3.55 NOM
L
0.75 0.95
L1 0.50 0.65
W 1.20 1.50
All Dimensions in mm
Maximum Ratings ^{@ T}A ^{= 25°C unless otherwise specified}
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Average Rectified Output Current (See also figure 5)
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave Superimposed on Rated Load
Operating Temperature Range
Storage Temperature Range
Symbol
V_RRM
V_RWM
VR
V_R(RMS)
I_O
I_FSM
T_j
T_STG
Value
Unit
35
V
25
V
8
A
120
A
-65 to +125
°C
-65 to +150
°C
Thermal Characteristics ^{@ TA = 25°C unless otherwise specified}
Characteristic
Thermal Resistance Junction to Soldering Point
Thermal Resistance Junction to Ambient Air (Note 2)
Thermal Resistance Junction to Ambient Air (Note 3)
Thermal Resistance Junction to Ambient Air (Note 4)
Symbol
Typ
RqJS
¾
RqJA
100
RqJA
65
RqJA
45
Max
3.0
¾
¾
¾
Notes:
1. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7.
2. FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf.
3. Polymide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf.
4. Polymide PCB, 2 oz. Copper. Cathode pad dimensions 9.4mm x 7.2mm. Anode pad dimensions 2.7mm x 1.6mm.
Unit
°C/W
°C/W
°C/W
°C/W
DS30488 Rev. 7 - 2
PowerDI is a trademark of Diodes Incorporated.
1 of 3
www.diodes.com
PDS835L
ã Diodes Incorporated