|
PDS4200H Datasheet, PDF (1/6 Pages) Diodes Incorporated – 4A HIGH VOLTAGE SCHOTTKY BARRIER RECTIFIER | |||
|
Features
⢠Lower Forward Voltage Drop than Ultrafast Rectifiers
⢠Very Low Leakage Current
⢠Soft Recovery Characteristics: Softness Factor (tb/ta) ⥠1 (see
figure 8)
⢠Highly Stable Oxide Passivated Junction
⢠High Forward Surge Current Capability
⢠Lead Free Finish, RoHS Compliant (Note 1)
⢠"Green" Molding Compound (No Br, Sb)
⢠Qualified to AEC-Q101 Standards for High Reliability
PDS4200H
4A HIGH VOLTAGE SCHOTTKY BARRIER RECTIFIER
PowerDI®5
Mechanical Data
⢠Case: PowerDI®5
⢠Case Material: Molded Plastic, âGreenâ Molding Compound. UL
Flammability Classification Rating 94V-0
⢠Moisture Sensitivity: Level 1 per J-STD-020
⢠Terminals: Finish â Matte Tin annealed over Copper leadframe.
Solderable per MIL-STD-202, Method 208
⢠Polarity: See Diagram
⢠Weight: 0.095 grams (approximate)
Top View
Bottom View
LEFT PIN
RIGHT PIN
BOTTOMSIDE
HEAT SINK
Note: Pins Left & Right must
be electrically connected
at the printed circuit board.
Ordering Information (Note 2)
Notes:
Part Number
PDS4200H-13
Case
PowerDI®5
Packaging
5000/Tape & Reel
1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes.
2. For packaging details, go to our website at http://www.diodes.com.
Marking Information
S4200H
YYWWK
S4200H = Product type marking code
= Manufacturersâ code marking
YYWW = Date code marking
YY = Last two digits of year (ex: 06 for 2006)
WW = Week code (01 - 53)
K = Factory Designator
PowerDI is a registered trademark of Diodes Incorporated.
PDS4200H
Document number: DS30596 Rev. 9 - 2
1 of 6
www.diodes.com
December 2010
© Diodes Incorporated
|
▷ |