PDS4150 Datasheet, PDF (1/3 Pages) Diodes Incorporated – 4A HIGH VOLTAGE SCHOTTKY BARRIER RECTIFIER

SPICE MODEL: PDS4150
PDS4150
4A HIGH VOLTAGE SCHOTTKY BARRIER RECTIFIER
PowerDI ^ä5
Features
· Guard Ring Die Construction for Transient Protection
· Low Forward Voltage Drop
· Very Low Leakage Current
· High Maximum Junction Temperature Capability
· Highly Stable Oxide Passivated Junction
· High Forward Surge Current Capability
· Lead Free Finish, RoHS Compliant (Note 1)
· "Green" Molding Compound (No Br, Sb)
· Qualified to AEC-Q101 Standards for High Reliability
D
b2
L1
A
A2
E
E1
L1
e
b1
b1
A2
Mechanical Data
· Case: PowerDI^ä5
· Case Material: Molded Plastic, “Green” Molding
Compound. UL Flammability Classification Rating 94V-0
· Moisture Sensitivity: Level 1 per J-STD-020C
· Terminals: Finish – Matte Tin annealed over Copper leadframe.
Solderable per MIL-STD-202, Method 208 ^e3
· Polarity: See Diagram
· Ordering Information (See Page 3)
· Marking: Type Number (See Page 3)
· Weight: 0.096 grams (approximate)
D
D2
b2
L
E2 _E
W
L1
e
b1
b1
LEFT PIN
RIGHT PIN
BOTTOMSIDE
HEAT SINK
Note: Pins Left & Right must
be electrically connected
at the printed circuit board.
PowerDI^ä5
Dim Min
Max
A
1.05
1.15
A2 0.33 0.43
b1 0.80 0.99
b2 1.70 1.88
D
3.90
4.05
D2
3.05 NOM
E
6.40
6.60
e
1.84 NOM
E1 5.30 5.45
E2
3.55 NOM
L
0.75
0.95
L1 0.50 0.65
W 1.20 1.50
All Dimensions in mm
Maximum Ratings ^{@ T}A ^{= 25°C unless otherwise specified}
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Average Rectified Output Current (See also figure 4)
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave Superimposed on Rated Load
Operating Temperature Range
Storage Temperature Range
Symbol
V_RRM
VRWM
V_R
V_R(RMS)
I_O
I_FSM
T_j
TSTG
Value
Unit
150
V
106
V
4
A
180
A
-65 to +175
°C
-65 to +175
°C
Thermal Characteristics ^{@ TA = 25°C unless otherwise specified}
Characteristic
Thermal Resistance Junction to Soldering Point
Thermal Resistance Junction to Ambient Air (Note 2)
Thermal Resistance Junction to Ambient Air (Note 3)
Thermal Resistance Junction to Ambient Air (Note 4)
Symbol
Typ
R_qJS
¾
RqJA
90
RqJA
60
RqJA
40
Max
2.0
¾
¾
¾
Notes:
1. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7.
2. FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf.
3. Polymide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf.
4. Polymide PCB, 2 oz. Copper. Cathode pad dimensions 9.4 mm x 7.2 mm. Anode pad dimensions 2.7 mm x 1.6 mm.
Unit
°C/W
°C/W
°C/W
°C/W
DS30473 Rev. 8 - 2
PowerDI is a trademark of Diodes Incorporated.
1 of 3
www.diodes.com
PDS4150
ã Diodes Incorporated