PDS3100 Datasheet, PDF (1/3 Pages) Diodes Incorporated – 3A HIGH VOLTAGE SCHOTTKY BARRIER RECTIFIER PowerDI 5

SPICE MODEL: PDS3100
PDS3100
3A HIGH VOLTAGE SCHOTTKY BARRIER RECTIFIER
PowerDI ^ä5
Features
· Guard Ring Die Construction for
Transient Protection
· Low Power Loss, High Efficiency
· Low Reverse Leakage Current
· For Use in Low Voltage, High Frequency Inverters,
Free Wheeling, and Polarity Protection Applications
· High Forward Surge Current Capability
· Lead Free Finish, RoHS Compliant (Note 1)
· "Green" Molding Compound (No Br, Sb)
D
b2
L1
A
PowerDI^ä5
A2 _{Dim Min}
Max
A
1.05
1.15
E
E1
A2
0.33
0.43
b1 0.80 0.99
L1
b2 1.70 1.88
Mechanical Data
· Case: PowerDI^ä5
LEFT PIN
RIGHT PIN
e
BOTTOMSIDE
HEAT SINK
b1
b1
D
A2
D2
3.90 4.05
3.05 NOM
· Case Material: Molded Plastic, “Green” Molding
Note: Pins Left & Right must
be electrically connected
Compound. UL Flammability Classification Rating
at the printed circuit board.
94V-0
· Moisture sensitivity: Level 1 per J-STD-020C
· Terminals: Finish – Matte Tin annealed over
D
D2
b2
L
E2 _E
E
6.40
6.60
e
1.84 NOM
E1 5.30 5.45
E2
3.55 NOM
Copper leadframe. Solderable per MIL-STD-202,
Method 208 e3
W
L1
L
0.75
0.95
L1 0.50 0.65
· Polarity: See Diagram
· Marking: See Page 3
· Weight: 0.093 grams (approx.)
e
b1
b1
W 1.20 1.50
All Dimensions in mm
Maximum Ratings ^{@ T}A ^{= 25°C unless otherwise specified}
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Average Rectified Output Current (See also Figure 5)
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave Superimposed on Rated Load
Operating Temperature Range
Storage Temperature Range
Symbol
VRRM
V_RWM
V_R
V_R(RMS)
I_O
I_FSM
T_j
T_STG
Value
Unit
100
V
70
V
3
A
90
A
-65 to +150
°C
-65 to +150
°C
Thermal Characteristics ^{@ TA = 25°C unless otherwise specified}
Characteristic
Thermal Resistance Junction to Soldering Point
Thermal Resistance Junction to Ambient Air (Note 2)
Thermal Resistance Junction to Ambient Air (Note 3)
Thermal Resistance Junction to Ambient Air (Note 4)
Symbol
Typ
R_qJS
¾
R_qJA
¾
R_qJA
¾
R_qJA
¾
Max
6.0
¾
¾
¾
Notes:
1. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7.
2. FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf.
3. Polyimide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf.
4. Polyimide PCB, 2 oz. Copper. Cathode pad dimensions 9.4mm x 7.2mm. Anode pad dimensions 2.7mm x 1.6mm.
Unit
°C/W
°C/W
°C/W
°C/W
DS30487 Rev. 4 - 2
PowerDI is a trademark of Diodes Incorporated.
1 of 3
www.diodes.com
PDS3100
ã Diodes Incorporated