PDS1045 Datasheet, PDF (1/3 Pages) Diodes Incorporated – 10A SCHOTTKY BARRIER RECTIFIER

SPICE MODEL: PDS1045
PDS1045
Features
· Guard Ring Die Construction for
Transient Protection
· Very Low Forward Voltage Drop
· High Forward Surge Current Capability
· For Use in Low Voltage, High Frequency Inverters,
Free Wheeling, and Polarity Protection Applications
· Lead Free Finish, RoHS Compliant (Note 1)
· "Green" Molding Compound (No Br, Sb)
· Qualified to AEC-Q101 Standards for High Reliability
Mechanical Data
· Case: PowerDI^ä5
· Case Material: Molded Plastic, “Green” Molding Compound.
UL Flammability Classification Rating 94V-0
· Moisture Sensitivity: Level 1 per J-STD-020C
· Terminals: Finish – Matte Tin annealed over Copper
leadframe. Solderable per MIL-STD-202,
Method 208 e3
· Polarity: See Diagram
· Marking: See Page 3
· Weight: 0.096 grams (approximate)
10A SCHOTTKY BARRIER RECTIFIER
PowerDI ^ä5
D
b2
L1
A
A2
E
E1
L1
e
b1
b1
A2
D
D2
b2
L
E2 _E
W
L1
e
b1
b1
LEFT PIN
RIGHT PIN
BOTTOMSIDE
HEAT SINK
Note: Pins Left & Right must
be electrically connected
at the printed circuit board.
PowerDI^ä5
Dim Min
Max
A
1.05
1.15
A2 0.33 0.43
b1 0.80 0.99
b2 1.70 1.88
D
3.90
4.05
D2
3.05 NOM
E
6.40
6.60
e
1.84 NOM
E1 5.30 5.45
E2
3.55 NOM
L
0.75
0.95
L1 0.50 0.65
W 1.20 1.50
All Dimensions in mm
Maximum Ratings ^{@ T}A ^{= 25°C unless otherwise specified}
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic
Symbol
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V_RRM
V_RWM
V_R
RMS Reverse Voltage
V_R(RMS)
Average Rectified Output Current (see also Figure 4)
I_O
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave Superimposed on Rated Load
I_FSM
Operating Junction TemperatureRange
Storage Temperature Range
V_R £ 80% V_RRM
VR £ 50% VRRM
T_j
T_STG
Value
Unit
45
V
32
V
10
A
275
A
-65 to +125
-65 to +150
°C
-65 to +150
°C
Thermal Characteristics ^{@ TA = 25°C unless otherwise specified}
Characteristic
Thermal Resistance Junction to Soldering Point
Thermal Resistance Junction to Ambient Air (Note 2)
Thermal Resistance Junction to Ambient Air (Note 3)
Thermal Resistance Junction to Ambient Air (Note 4)
Symbol
Typ
R_qJS
¾
RqJA
85
RqJA
65
RqJA
50
Max
0.8
¾
¾
¾
Notes:
1. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7.
2. FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf.
3. Polymide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf.
4. Polymide PCB, 2 oz. Copper. Cathode pad dimensions 9.4mm x 7.2mm. Anode pad dimensions 2.7mm x 1.6mm.
Unit
°C/W
°C/W
°C/W
°C/W
DS30539 Rev. 10 - 2
PowerDI is a trademark of Diodes Incorporated.
1 of 3
www.diodes.com
PDS1045
ã Diodes Incorporated