PD3S140_09 Datasheet, PDF (1/4 Pages) Diodes Incorporated – 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER

Features
• Guard Ring Die Construction for Transient Protection
• High Surge Capability
• Lead Free Finish, RoHS Compliant (Note 1)
• "Green" Molding Compound (No Br, Sb)
• Qualified to AEC-Q101 Standards for High Reliability
• Ultra-Small Surface Mount Package
PD3S140
1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
PowerDI^®323
Please click here to visit our online spice models database.
Mechanical Data
• Case: PowerDI^®323
• Case Material: Molded Plastic, “Green” Molding Compound.
UL Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020
• Polarity: Cathode Band
• Terminals: Finish - Matte Tin annealed over Copper leadframe.
Solderable per MIL-STD-202, Method 208
• Marking Information: See Page 3
• Ordering Information: See Page 3
• Weight: 0.006 grams (approximate)
Top View
Bottom View
Maximum Ratings @T_A = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Average Forward Current (See also figure 4)
Non-Repetitive Peak Forward Surge Current 8.3ms
single half sine-wave superimposed on rated load
Symbol
V_RRM
V_RWM
V_R
I_F(AV)
I_FSM
Value
Unit
40
V
1.0
A
22
A
Thermal Characteristics
Characteristic
Thermal Resistance Junction to Soldering Point
Thermal Resistance Junction to Ambient Air (Note 2)
Thermal Resistance Junction to Ambient Air (Note 3)
Operating and Storage Temperature Range
Symbol
R_θJS
R_θJA
R_θJA
T_J, T_STG
Typ
Max
⎯
15
175
⎯
130
⎯
-65 to +150
Unit
°C/W
°C/W
°C/W
°C
Electrical Characteristics @T_A = 25°C unless otherwise specified
Characteristic
Reverse Breakdown Voltage (Note 4)
Forward Voltage
Leakage Current (Note 4)
Total Capacitance (See also figure 3)
Symbol Min
V_(BR)R
40
⎯
V_F
⎯
⎯
⎯
I_R
⎯
⎯
C_T
⎯
Typ
⎯
0.37
0.44
0.46
0.49
0.3
2
32
Max Unit
Test Condition
⎯
V I_R = 100μA
0.42
I_F = 0.1A
0.50
0.52
V ^{IF = 0.5A}
I_F = 0.7A
0.55
I_F = 1.0A
4
50
μA
V_R = 5V, T_A = 25°C
V_R = 40V, T_A = 25°C
⎯
pF V_R = 10V, f = 1.0MHz
Notes:
1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at http://www.diodes.com/quality/lead_free.html.
2. FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. T_A = 25°C.
3. Polymide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. T_A = 25°C.
4. Short duration pulse test used to minimize self-heating effect.
PowerDI is a registered trademark of Diodes Incorporated.
PD3S140
Document number: DS30862 Rev. 10 - 2
1 of 4
www.diodes.com
July 2009
© Diodes Incorporated