English
Language : 

PD3S130H_08 Datasheet, PDF (1/3 Pages) Diodes Incorporated – 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
Features
• Ultra-Small Surface Mount Package
• Guard Ring Die Construction for Transient Protection
• High Surge Capability
• Lead Free Finish, RoHS Compliant (Note 1)
• "Green" Molding Compound (No Br, Sb)
• Qualified to AEC-Q101 Standards for High Reliability
PD3S130H
1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
PowerDI®323
Please click here to visit our online spice models database.
Mechanical Data
• Case: PowerDI®323
• Case Material: Molded Plastic, “Green” Molding Compound.
UL Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020D
• Polarity: Cathode Band
• Terminals: Finish - Matte Tin annealed over Copper
leadframe. Solderable per MIL-STD-202, Method 208
• Marking Information: See Page 3
• Ordering Information: See Page 3
• Weight: 0.006 grams (approximate)
Top View
Maximum Ratings @TA = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Average Forward Current (See also figure 4)
Non-Repetitive Peak Forward Surge Current 8.3ms
Single Half Sine-Wave Superimposed on Rated Load
Symbol
VRRM
VRWM
VR
VR(RMS)
IF(AV)
IFSM
Value
30
21
1.0
22
Unit
V
V
A
A
Thermal Characteristics
Characteristic
Thermal Resistance Junction to Soldering Point
Thermal Resistance Junction to Ambient Air (Note 2) @ TA = 25°C
Thermal Resistance Junction to Ambient Air (Note 3) @ TA = 25°C
Operating and Storage Temperature Range
Symbol
RθJS
RθJA
RθJA
TJ, TSTG
Typ
Max
⎯
6
177
⎯
128
⎯
-65 to +150
Unit
°C/W
°C/W
°C/W
°C
Electrical Characteristics @TA = 25°C unless otherwise specified
Characteristic
Reverse Breakdown Voltage (Note 4)
Forward Voltage
Leakage Current (Note 4)
Total Capacitance
Symbol Min
V(BR)R
30
⎯
VF
⎯
⎯
IR
⎯
⎯
CT
⎯
Typ
⎯
0.35
0.42
0.47
0.7
10
40
Max Unit
Test Condition
⎯
V IR = 100μA
⎯
IF = 0.1A
0.45
⎯
V IF = 0.7A
IF = 1.0A
⎯
100
μA
VR = 5V, TA = 25°C
VR = 30V, TA = 25°C
⎯
pF VR = 10V, f = 1.0MHz
Notes:
1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes.
2. FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf.
3. Polymide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf.
4. Short duration pulse test used to minimize self-heating effect.
PowerDI is a registered trademark of Diodes Incorporated.
PD3S130H
Document number: DS30694 Rev. 7 - 2
1 of 3
www.diodes.com
June 2008
© Diodes Incorporated
 ▷