English
Language : 

PD3S120L Datasheet, PDF (1/3 Pages) Diodes Incorporated – 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
SPICE MODEL: PD3S120L
PD3S120L
1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
PowerDI™323
Features
Mechanical Data
• Guard Ring Die Construction for
Transient Protection
• High Surge Capability
• Lead Free Finish, RoHS Compliant (Note 1)
• "Green" Molding Compound (No Br, Sb)
• Ultra-Small Surface Mount Package
• Qualified to AEC-Q101 Standards for High Reliability
• Case: PowerDI™323
• Case Material: Molded Plastic, “Green” Molding
Compound. UL Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020C
• Polarity: Cathode Band
• Terminals: Finish - Matte Tin annealed over Copper
leadframe. Solderable per MIL-STD-202, Method 208
• Marking: Date Code & Type Code, See Page 3
• Type Code: 34
• Ordering Information: See Page 3
• Weight: 0.006 grams (approx.)
TOP VIEW
BOTTOM VIEW
Maximum Ratings @ TA = 25ºC unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%.
Characteristic
Symbol
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Average Forward Current (See also figure 4)
Non-Repetitive Peak Forward Surge Current 8.3ms
single half sine-wave superimposed on rated load
VRRM
VRWM
VR
VR(RMS)
IF(AV)
IFSM
Operating Temperature Range
Tj
Storage Temperature Range
TSTG
Value
20
14
1.0
33
-65 to +125
-65 to +125
Unit
V
V
A
A
°C
°C
Thermal Characteristics
Characteristic
Thermal Resistance Junction to Soldering Point
Thermal Resistance Junction to Ambient Air (Note 2)
Thermal Resistance Junction to Ambient Air (Note 3)
Symbol
RθJS
RθJA
RθJA
Typ
⎯
170
144
Max
Unit
6
°C/W
⎯
°C/W
⎯
°C/W
Electrical Characteristics @ TA = 25ºC unless otherwise specified
Characteristic
Reverse Breakdown Voltage (Note 4)
Forward Voltage
Leakage Current (Note 4)
Total Capacitance
Symbol Min
V(BR)R
20
⎯
VF
⎯
⎯
⎯
IR
⎯
CT
⎯
Typ
⎯
0.27
0.34
0.36
0.27
10
13
30
11
46
Max
⎯
0.31
0.38
0.42
0.30
50
60
160
30
⎯
Unit
V
V
µA
µA
µA
mA
pF
Test Condition
IR = 100µA
IF = 0.1A, TA = 25ºC
IF = 0.7A, TA = 25ºC
IF = 1.0A, TA = 25ºC
IF = 1.0A, TA = 125ºC
VR = 5V, TA = 25°C
VR = 10V, TA = 25°C
VR = 20V, TA = 25°C
VR = 20V, TA = 125°C
VR = 10V, f = 1.0MHz
Notes:
1. RoHS revision 13.2.2003. High Temperature Solder Exemptions Applied, see EU Directive Annex Note 7.
2. FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf.
3. Polymide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf.
4. Short duration pulse test to minimize self-heating effect.
DS30793 Rev. 3 – 2
PowerDI is a trademark of Diodes Incorporated.
1 of 3
www.diodes.com
PD3S120L
© Diodes Incorporated
 ▷