MMBZ15VDL_08 Datasheet, PDF (1/4 Pages) Diodes Incorporated – 40W PEAK POWER DUAL SURFACE MOUNT TVS

Features
• Dual TVS in Common Cathode Configuration for ESD
Protection
• 40 Watt Peak Power Dissipation @1.0ms (Unidirectional)
• 225 mW Power Dissipation
• Ideally Suited for Automated Insertion
• Low Leakage
• Lead, Halogen and Antimony Free, RoHS Compliant
"Green" Device (Notes 4 and 5)
• Qualified to AEC-Q101 Standards for High Reliability
MMBZ15VDL, MMBZ27VCL
40W PEAK POWER DUAL SURFACE MOUNT TVS
Please click here to visit our online spice models database.
Mechanical Data
• Case: SOT-23
• Case Material: Molded Plastic. UL Flammability Rating
Classification 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020D
• Terminals: Solderable per MIL-STD-202, Method 208
• Lead Free Plating (Matte Tin Finish annealed over Alloy 42
leadframe).
• Polarity: See Diagram
• Marking Information: See Page 3
• Ordering Information: See Page 3
• Weight: 0.008 grams (approximate)
Top View
Device Schematic
Maximum Ratings @T_A = 25°C unless otherwise specified
Characteristic
Peak Power Dissipation (Note 2)
Symbol
P_PK
Value
40
Unit
W
Thermal Characteristics
Characteristic
Power Dissipation (Note 1)
Thermal Resistance, Junction to Ambient Air (Note 1)
Operating and Storage Temperature Range
Symbol
P_D
R_θJA
T_J, T_STG
Value
225
556
–65 to +150
Unit
mW
°C/W
°C
Electrical Characteristics @T_A = 25°C unless otherwise specified
V_F = 0.9V max @ I_F = 10mA (Note 3)
Type
Number
MMBZ15VDL
Marking
Code
KVJ
V_RWM
Volts
12.8
I_R @
V_RWM
nA
100
Breakdown Voltage
V_BR (Note 3) (V)
Min
Nom
Max
14.3
15
15.8
@ I_T
mA
1.0
V_{C @} I_PP (Note 2)
V_C
I_PP
V
A
21.2
1.9
Typical
Temperature
Coefficient
T_C (%/°C)
+0.080
V_F = 1.1V max @ I_F = 200mA (Note 3)
Type
Number
MMBZ27VCL
Marking
Code
KVP
V_RWM
Volts
22
I_R @
V_RWM
nA
50
Min
25.65
Breakdown Voltage
V_BR (Note 3) (V)
Nom
27
Max
28.35
@ I_T
mA
1.0
V_{C @} I_PP (Note 2)
V_C
I_PP
V
A
38
1.0
Typical
Temperature
Coefficient
T_C (%/°C)
+0.090
Notes:
1. Device mounted on FR-5 PCB 1.0 x 0.75 x 0.062 inch pad layout as shown on Diodes Inc. suggested pad layout AP02001,
which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. 200mW per element must not be exceeded.
2. Non-repetitive current pulse per Figure 2 and derate above T_A = 25°C per Figure 1.
3. Short duration pulse test used to minimize self-heating effect.
4. No purposefully added lead. Halogen and Antimony Free.
5. Product manufactured with Data Code V9 (week 33, 2008) and newer are built with Green Molding Compound. Product manufactured prior to Date
Code V9 are built with Non-Green Molding Compound and may contain Halogens or Sb₂O₃ Fire Retardants.
MMBZ15VDL, MMBZ27VCL
Document number: DS30352 Rev. 11 - 2
1 of 4
www.diodes.com
July 2008
© Diodes Incorporated