|
MMBD5004BRM Datasheet, PDF (1/5 Pages) Diodes Incorporated – HIGH VOLTAGE SURFACE MOUNT SWITCHING DIODE ARRAY | |||
|
MMBD5004BRM
HIGH VOLTAGE SURFACE MOUNT SWITCHING DIODE ARRAY
Please click here to visit our online spice models database.
Features
Mechanical Data
⢠Two Series Diode Circuits Connect to Form Full Wave Bridge
⢠Fast Switching Speed
⢠Low Capacitance
⢠400V Reverse Breakdown Voltage Rating
⢠Lead Free/RoHS Compliant Version (Note 3)
⢠"Green" Device (Note 4)
⢠Case: SOT-26
⢠Case Material: Molded Plastic, "Green" Molding Compound,
Note 4. UL Flammability Classification Rating 94V-0
⢠Moisture Sensitivity: Level 1 per J-STD-020
⢠Terminals: Matte Tin Finish annealed over Copper leadframe
(Lead Free Plating). Solderable per MIL-STD-202, Method 208
⢠Polarity: See Diagram
⢠Marking Information: See Page 2
⢠Ordering Information: See Page 2
⢠Weight: 0.016 grams (approximate)
SOT-26
AC
C1
C2
1
TOP VIEW
A1
A2
AC
2
TOP VIEW
Internal Schematic
Maximum Ratings @TA = 25°C unless otherwise specified
Characteristic
Symbol
Value
Unit
Repetitive Peak Reverse Voltage
VRRM
400
V
Working Peak Reverse Voltage
DC Blocking Voltage
VRWM
350
V
VR
RMS Reverse Voltage
VR(RMS)
247
V
Forward Continuous Current
IF
225
mA
Peak Repetitive Forward Current
IFRM
625
mA
Non-Repetitive Peak Forward Surge Current
@ t = 1.0ms
@ t = 1.0s
IFSM
2.0
1.0
A
Thermal Characteristics
Characteristic
Power Dissipation (Note 1)
Thermal Resistance Junction to Ambient Air (Note 1)
Operating and Storage Temperature Range
Symbol
PD
RθJA
TJ,TSTG
Value
350
357
-65 to +150
Unit
mW
°C/W
°C
Electrical Characteristics @TA = 25°C unless otherwise specified
Characteristic
Reverse Breakdown Voltage (Note 2)
Forward Voltage
Reverse Current (Note 2)
Total Capacitance
Reverse Recovery Time
Symbol Min Typ Max Unit
Test Condition
V(BR)R
400
â¯
â¯
V IR = 150μA
⯠0.87
IF = 20mA
VF
â¯
â¯
1.0
V IF = 100mA
â¯
1.25
IF = 200mA
IR
â¯
â¯
â¯
100
100
5
nA VR = 240V
μA VR = 240V, TJ = 150°C
μA VR = 360V
CT
â¯
0.7
2.0
pF VR = 0V, f = 1.0MHz
trr
â¯
â¯
50
ns IF = IR = 30mA,
Irr = 3.0mA, RL = 100Ω
Notes:
1. Part mounted on polyimide substrate PC board with recommended pad layout, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
2. Short duration pulse test used to minimize self-heating effect.
3. No purposefully added lead.
4. Diodes Inc.'s "Green" policy can be found on our website at http://www.diodes.com/products/lead_free/index.php.
MMBD5004BRM
Document number: DS30714 Rev. 4 - 2
1 of 5
www.diodes.com
December 2009
© Diodes Incorporated
|
▷ |