LM2902Q Datasheet, PDF (1/16 Pages) Diodes Incorporated – AUTOMOTIVE COMPLIANT DUAL AND QUAD OPERATIONAL AMPLIFIERS

LM2902Q/LM2902AQ/LM2904Q/LM2904AQ
AUTOMOTIVE COMPLIANT DUAL AND QUAD OPERATIONAL AMPLIFIERS
Description
The LM2902Q/2904Q series operational amplifiers consist of four and
two independent high-gain operational amplifiers with very low input
offset voltage specification. They are designed to operate from a
single power supply over a wide range of voltages; however,
operation from split power supplies is also possible. They offer low
power supply current independent of the magnitude of the power
supply voltage.
The LM2904Q dual devices are available in SO-8, TSSOP-8 and
MSOP-8; and the LM2902Q quad devices are available in SO-14 and
TSSOP-14. All are in industry-standard pinouts, and both use “green”
mold compound as standard.
The LM2902Q/2904Q are characterized for operation from
-40°C to +125°C, qualified to AEC-Q100 Grade 1 and are Automotive
Compliant supporting PPAPs.
Features
 Wide Power Supply Voltage Range:
 Single Supply: 3V to 36V
 Dual Supplies: ±1.5V to ±18V
 Very Low Supply Current Drain – Independent of Supply Voltage
 LM2904Q: 500µA
 LM2902Q: 700µA
 Low Input Bias Current: 20nA
 Low Input Offset Voltage:
 A Versions: 1mV (Typ)
 Non-A Version: 2mV (Typ)
 Large DC Voltage Gain: 100dB
 Wide Bandwidth (Unity Gain): 700kHz (Temperature
Compensated)
 Internally Compensated with Unity Gain
 Input Common-Mode Voltage Range Includes Ground
 Differential Input Voltage Range Equal to Power Supply Voltage
 Large Output Voltage Swing: 0V to VCC -1.5V
 Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
 Halogen and Antimony Free. “Green” Device (Note 3)
 Qualified to AEC-Q100 Grade 1
 PPAP Capable (Note 4)
Pin Assignments
LM2904Q/ LM2904QA
(Top View)
1OUT 1
1IN- ² -
1
1IN+ ³
GND 4
8 VCC
7 2OUT
- _{6 2IN-}
2
+ _{5 2IN+}
SO-8/TSSOP-8/MSOP-8
LM2902Q/ LM2902QA
(Top View)
1OUT 1
1IN- 2 -
1
1IN+ 3
VCC 4
2IN+ 5
2
2IN- ₆ ^-
2OUT 7
14 4OUT
- 13 _4IN-
4
12 4IN+
11 GND
10 3IN+
3
- _{9 3IN-}
8 3OUT
SO-14/TSSOP-14
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. Automotive products are AEC-Q100 qualified and are PPAP capable. Refer to http://www.diodes.com/quality/product_compliance_definitions/.
LM2902Q/LM2902AQ/LM2904Q/LM2904AQ
Document number: DS37815 Rev. 3 - 2
1 of 16
www.diodes.com
June 2016
© Diodes Incorporated