LLSD103A-103C Datasheet, PDF (1/3 Pages) Diodes Incorporated – SURFACE MOUNT SCHOTTKY BARRIER DIODE

LLSD103A - 103C
SURFACE MOUNT SCHOTTKY BARRIER DIODE
NOT RECOMMENDED ^{FOR NEW DESIGNS}
Features
PLEASE USE ^{SD103AW - SD103CW}
• Low Forward Voltage Drop
• Guard Ring Construction for Transient Protection
C
• Fast Reverse Recovery Time
• Lead Free Finish, RoHS Compliant (Note 3)
B
Mechanical Data
• Case: MiniMELF
• Case Material: Glass. UL Flammability Classification
Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020C
• Terminals: Finish  Sn97.5Ag2.5. Solderable per
MIL-STD-202, Method 208
• Polarity: Cathode Band
• Ordering Information: See Last Page
• Marking: Cathode Band Only
• Weight: 0.05 grams (approximate)
Maximum Ratings ^{@ TA = 25°C unless otherwise specified}
A
MiniMELF
Dim
Min
Max
A
3.30
3.70
B
1.30
1.60
C
0.28
0.50
All Dimensions in mm
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Forward Continuous Current (Note 1)
Repetitive Peak Forward Current
@ t ≤ 1.0s
Non-Repetitive Peak Forward Surge Current @ t ≤ 1.0s
@ t = 10ms
Power Dissipation (Note 1)
Thermal Resistance, Junction to Ambient Air (Note 1)
Operating Temperature Range
Storage Temperature Range
Symbol
VRRM
VRWM
VR
V_R(RMS)
IFM
I_FRM
I_FSM
P_d
RθJA
T_j
TSTG
LLSD103A
40
28
LLSD103B
30
21
350
1.0
1.5
7.5
400
250
-55 to +125
-55 to +150
LLSD103C
20
14
Unit
V
V
mA
A
A
mW
°C/W
°C
°C
Electrical Characteristics ^{@ TA = 25°C unless otherwise specified}
Characteristic
Forward Voltage
Peak Reverse Current (Note 2)
Total Capacitance
Reverse Recovery Time
Symbol Min
Typ
Max Unit
Test Condition
V_F


0.37
0.60
V
IF = 20mA
I_F = 200mA
LLSD103A
VR = 30V
LLSD103B IR


5.0
µA VR = 20V
LLSD103C
V_R = 10V
C_T

50

pF VR = 0V, f = 1.0MHz
trr


10
ns
I_F = I_R = 50mA to 200mA,
Irr = 0.1 x IR, RL = 100Ω
Note:
1. Part mounted on FR-4 board with recommended pad layout, which can be found on our website
at http://www.diodes.com/datasheets/ap02001.pdf.
2. Short duration test pulse used to minimize self-heating effect.
3. EC Directive 2002/95/EC (RoHS) revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied where applicable,
see EU Directive Annex Notes 5 and 7.
DS30068 Rev. 5 - 3
1 of 3
www.diodes.com
LLSD103A - 103C
© Diodes Incorporated