English
Language : 

GP50PF-1A Datasheet, PDF (1/1 Pages) Diodes Incorporated – 50 AMP PRESS FIT HIGH VOLTAGE DIODES (GPP DIE)
DIOTEC ELECTRONICS CORP
18020 Hobart Blvd., Unit B
Gardena, CA 90248 U.S.A
Tel.: (310) 767-1052 Fax: (310) 767-7958
Data Sheet No. GP50PF-1A
50 AMP PRESS FIT HIGH VOLTAGE DIODES (GPP DIE)
FEATURES
VOID FREE VACUUM DIE SOLDERING For Maximum
Mechanical Strength And Heat Dissipation
(Solder Voids: Typical < 2%, Max. < 5% of Die Area)
MECHANICAL SPECIFICATION
0.052”+_ 0.002”
Full Silicon Die Area on P- and N-Sides Are Soldered to
Copper Slugs For Minimum Stress And Maximum Heat
Dissipation
Press Fit Into Heat Sink to Further Enhance Heat
Handling Capability
Very Low Resistivity Silicon Die For Lower Operating
Junction Temperature
0.505”/502”
OVER KNURL
0.194”
0.184”
0.401”
0.385”
0.173”
0.157”
0.012”
0.008”
1.00”
Min
Very Low Reverse Current Leakage For Minimum Energy
Loss
MECHANICAL DATA
Case: Nickel plated copper
Finish: All external surfaces are corrosion resistant
and the contact areas are readily weldable or
solderable
Maximum Soldering Temperature: 250 oC, 0.25" from case
for 10 Seconds
Mounting Position: Any. Maximum force used for diode
insertion to be 12 KN
Polarity: Color coded epoxy ring- ANODE on LEAD (Beige Ring):
Part No.=GP5002PFA/GP5004PFA. CATHODE on LEAD (Black Ring)
Part No.=GP5002PFC/GP5004PFC. Part No. marked on cap base.
DT
GP5004A
0452
GLASS PASSIVATED
SQUARE DIE
0.180”
ALL DIMENSIONS IN INCHES
70 Typ.
0.007”
0.005”
78 Places
Equally
Spaced
RoHS COMPLIANT
MAXIMUM RATINGS & ELECTRICAL CHARACTERISTICS
Ratings at 25 °C ambient temperature unless otherwise specified.
PARAMETER (TEST CONDITIONS)
SYMBOL
Series Number
Maximum Recurrent Peak Reverse Voltage
Working Peak Reverse Voltage
Maximum DC Blocking Voltage
Non-Repetitive Peak Reverse Voltage (Half Wave, 60 Hz, Single Phase)
Average Forward Rectified Current
Non-repetitive Peak Forward Surge Current
(Half wave, single phase, 60 Hz sine applied to rated load)
Forward VoltageDrop
@ 50Amp DC (Typical)
@ 100Amp DC (Typical)
Maximum DC Reverse Current at Rated Blocking Voltage Tc = 25 OC)
Junction Operating & Storage Temperature Range
VRRM
VRWM
VDC
VRSM
IO
IFSM
IR
TJ,TSTG
RATINGS
GP5002PFA GP5004PFA
GP5002PFC GP5004PFC
200
400
240
50
600
<1.05
<1.20
<1.0
-65 to +200
480
50
600
<1.05
<1.20
<1.0
-65 to +200
UNITS
VOLTS
AMPS
VOLTS
mA
°C