ES2G_1 Datasheet, PDF (1/3 Pages) Diodes Incorporated – 2.0A SURFACE MOUNT SUPER-FAST RECTIFIER

ES2G
2.0A SURFACE MOUNT SUPER-FAST RECTIFIER
Features
· Glass Passivated Die Construction
· Super-Fast Recovery Time For High Efficiency
· Surge Overload Rating to 50A Peak
· Ideally Suited for Automated Assembly
· Lead Free Finish/RoHS Compliant (Note 4)
Mechanical Data
· Case: SMB
· Case Material: Molded Plastic. UL Flammability
Classification Rating 94V-0
· Moisture Sensitivity: Level 1 per J-STD-020C
· Terminals: Lead Free Plating (Matte Tin Finish).
Solderable per MIL-STD-202, Method 208 e3
· Polarity: Cathode Band or Cathode Notch
· Marking Information: See Page 3
· Ordering Information: See Page 3
· Weight: 0.093 grams (approximate)
SMB
B
Dim Min Max
A
3.30 3.94
A
C
B
4.06 4.57
C
1.96 2.21
D
0.15 0.31
D
E
5.00 5.59
G
0.10 0.20
J
H
0.76 1.52
H
G
E
J
2.00 2.62
All Dimensions in mm
Maximum Ratings and Electrical Characteristics ^{@ T}A ^{= 25°C unless otherwise specified}
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic
Symbol
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage (Note 5)
VRRM
V_RWM
V_R
RMS Reverse Voltage
VR(RMS)
Average Rectified Output Current
@ TT = 110°C
I_O
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave Superimposed on Rated Load
I_FSM
Forward Voltage
@ IF = 2.0A V_FM
Peak Reverse Current
at Rated DC Blocking Voltage (Note 5)
@ T_A = 25°C
@ T_A = 125°C
I_RM
Reverse Recovery Time (Note 3)
t_rr
Typical Capacitance (Note 2)
CT
Typical Thermal Resistance, Junction to Terminal (Note 1) RqJT
Operating and Storage Temperature Range
Tj, TSTG
Value
400
280
2.0
50
1.25
5.0
350
35
25
20
-55 to +150
Notes:
1. Unit mounted on PC board with 5.0 mm² (0.013 mm thick) copper pads as heat sink.
2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
3. Measured with I_F = 0.5A, I_R = 1.0A, I_rr = 0.25A. See Figure 5.
4. RoHS revision 13.2.2003. Glass and high temperature solder exemptions applied, see EU Directive Annex Notes 5 and 7.
5. Short duration pulse test used to minimize self-heating effect
Unit
V
V
A
A
V
mA
ns
pF
°C/W
°C
DS30212 Rev. 6 - 2
1 of 3
www.diodes.com
ES2G
ã Diodes Incorporated