DML1005LDS Datasheet, PDF (1/10 Pages) Diodes Incorporated – SINGLE CHANNEL SMART LOAD SWITCH

DML1005LDS
SINGLE CHANNEL SMART LOAD SWITCH
Description and Applications
The DML1005LDS is a single channel load switch with very low on-
resistance in a small package. It contains an N-channel MOSFET for
up to VBIAS-1.5V input voltage operation and 10A current channel with
3.2V to 5.5V bias supply. The loadswitch is controlled by a low
voltage control signal through ON pin.
 Portable Computers
 Ultrabooks
 Tablet PCs
 Set Top Boxed
 LCD TV
 Telecom/Networking/Datacom Equipment
 SSD
 Consumer Electronics
Features and Benefits
 Low RDS(ON) – Ensures On-State Losses Are Minimized
 0.8V to VBIAS-1.5V Input Voltage Range
 10A Continuous Current
 Low RDS(ON) Internal NFETs
5mΩ at VBIAS = 5V, VIN = 1.05V, TA = +85°C
 35µA Low Quiescent Current
 2µs Turn-On Rise Time
 3.2V to 5.5V Bias Voltage
 Integrated Quick Output Discharge Resistor
 Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
 Halogen and Antimony Free. “Green” Device (Note 3)
V-DFN3030-8
Top View
Pin1
Bottom View
Ordering Information (Note 4)
Notes:
Part Number
DML1005LDS-7
Case
V-DFN3030-8
Packaging
3,000/Tape & Reel
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. For packaging details, go to our website at http://www.diodes.com/products/packages.html.
Pin Description
Pin Number
1, 2, EPAD
3
4
5
6, 7, 8
Pin Name
IN
VBIAS
ON
GND
OUT
Pin Function
Load Switch Input. Bypass capacitor is recommended to minimize input voltage dip. Recommended
voltage range of this pin is 0.8V to VBIAS-1.5V to obtain optimal RON.
Bias Voltage. Power supply input for the device. Recommended voltage range is 3.2V to 5.5V.
Enable Input. Load switch is on when ON is pulled high. Load switch is off when ON is pulled low.
Do not leave floating.
Ground.
Load switch output.
DML1005LDS
Document number: DS38066 Rev. 2 - 2
1 of 10
www.diodes.com
September 2015
© Diodes Incorporated