DMF05LCFLP Datasheet, PDF (1/4 Pages) Diodes Incorporated – FIVE ELEMENT COMMON ANODE ESD-PROTECTION DIODE ARRAY

DMF05LCFLP
FIVE ELEMENT COMMON ANODE ESD-PROTECTION DIODE ARRAY
Features
• 5-line ESD Protection
• Sub-miniature Package (1.6 x 1.6mm)
• Low Capacitance – 42pF typ @ V_R = 0V
• Provides a High Level of Protection from ESD to IEC61000-4-2
• ±30kV Contact Discharge
• ±30kV Air Discharge
• Lead Free/RoHS Compliant (Note 1)
• "Green" Device (Note 2)
• Qualified to AEC-Q101 Standards for High Reliability
Mechanical Data
• Case: DFN1616-6
• Case Material: Molded Plastic, “Green” Molding Compound.
UL Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020
• Terminals: Solderable per MIL-STD-202, Method 208
• Lead Free Plating (NiPdAu Finish over Copper leadframe).
• Polarity: Pin 1 Dot and Center Pad Notch, See Diagram
• Marking Information: See Page 2
• Ordering Information: See Page 2
• Weight: 0.004 grams (approximate)
DFN1616-6
6
5
4
BOTTOM VIEW
1
2
3
TOP VIEW
Internal Schematic
Maximum Ratings @T_A = 25°C unless otherwise specified
Characteristic
Symbol
Value
Unit
Peak Pulse Current, 8/20μs waveform, single shot, per IEC61000-4-5
I_PPM
5
A
Peak Pulse Power, 8/20μs waveform, single shot, per IEC61000-4-5
P_PP
70
W
Human Body Model
8
kV
ESD Rating
Machine Model
IEC61000-4-2 Air Discharge
ESD
400
30
V
kV
IEC61000-4-2 Contact Discharge
30
kV
Thermal Characteristics
Characteristic
Thermal Resistance Junction to Ambient Air (Note 3)
Operating and Storage Temperature Range
Symbol
R_θJA
T_J, T_STG
Value
256
-55 to +150
Unit
°C/W
°C
Electrical Characteristics @T_A = 25°C unless otherwise specified
Reverse
Standoff
Voltage
V_RWM @
I_RWM = 1μA
Breakdown
Voltage
V_BR @ I_T
Min (V) Min (V) Max (V)
5.0
6
8
Max. Reverse
Test ^{Leakage @}
Current
V_RWM
(Note 4)
I_T (mA)
1.0
I_R (μA)
0.1
Max. Clamping
Voltage
@ I_PP = 1A
per IEC61000-4-5
V_C (V)
9.5
Max. Clamping
Voltage V_c
@ I_PP = 5A
per IEC61000-4-5
V_C (V)
12.5
Max. Forward
Clamping
Max. Forward
Clamping
Max Total Typical Total
Voltage V_F
@ I_F = 1A
per IEC61000-4-5
Voltage V_F
@ I_F = 5A
per IEC61000-4-5
Capacitance
V_R = 0V
f = 1MHz
Capacitance
V_R = 2.5V
f = 1MHz
V_F (V)
V_F (V)
C_T (pF)
C_T (pF)
2
4
50
25
Notes:
1. No Purposefully added Lead.
2. Diodes Inc.'s "Green" policy can be found on our website at http://www.diodes.com/products/lead_free/index.php.
3. Part mounted on FR-4 PC board with recommended pad layout, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf.
Only one switching diode powered on.
4. Short duration pulse test used to minimize self-heating effect.
DMF05LCFLP
Document number: DS32004 Rev. 3 - 2
1 of 4
www.diodes.com
July 2010
© Diodes Incorporated