|
DFLS260 Datasheet, PDF (1/3 Pages) Diodes Incorporated – 2.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER | |||
|
Features
⢠Guard Ring Die Construction for Transient Protection
⢠Low Power Loss, High Efficiency
⢠Patented Interlocking Clip Design for High Surge Current
Capacity
⢠Qualified to AEC-Q101 Standards for High Reliability
⢠Lead Free Finish, RoHS Compliant (Note 4)
⢠Green Molding Compound (No Br, Sb)
DFLS260
2.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
PowerDI®123
Please click here to visit our online spice models database.
Mechanical Data
⢠Case: PowerDI®123
⢠Case Material: Molded Plastic, âGreenâ Molding Compound.
UL Flammability Classification Rating 94V-0
⢠Moisture Sensitivity: Level 1 per J-STD-020D
⢠Terminal Connections: Cathode Band
⢠Terminals: Finish â Matte Tin annealed over Copper
leadframe. Solderable per MIL-STD-202 Method 208
⢠Marking Information: See Page 3
⢠Ordering Information: See Page 3
⢠Weight: 0.01 grams (approximate)
Top View
Maximum Ratings @TA = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
60
V
VR
RMS Reverse Voltage
VR(RMS)
42
V
Average Forward Current
IF(AV)
2.0
A
Non-Repetitive Peak Forward Surge Current 8.3ms
single half sine-wave superimposed on rated load
IFSM
50
A
Thermal Characteristics
Characteristic
Thermal Resistance Junction to Soldering Point (Note 2)
Thermal Resistance Junction to Ambient (Note 1)
Operating and Storage Temperature Range
Symbol
RθJS
RθJA
TJ, TSTG
Typ
Max
â¯
6
125
â¯
-65 to +150
Unit
°C/W
°C/W
°C
Electrical Characteristics @TA = 25°C unless otherwise specified
Characteristic
Reverse Breakdown Voltage (Note 3)
Forward Voltage
Leakage Current (Note 3)
Total Capacitance
Symbol
Min
Typ
Max Unit
Test Condition
V(BR)R
60
â¯
â¯
V IR = 0.2mA
VF
â¯
â¯
0.62
0.56
V IF = 2.0A, TA = 25°C
IF = 2.0A, TA = 125°C
IR
â¯
â¯
0.1
mA VR = 60V, TA = 25°C
CT
â¯
67
â¯
pF VR = 10V, f = 1.0MHz
Notes:
1. Part mounted on FR-4 board with 2 oz., minimum recommended copper pad layout, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
2. Theoretical RθJS calculated from the top center of the die straight down to the PCB/cathode tab solder junction.
3. Short duration pulse test to minimize self-heating effect.
4. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes.
PowerDI is a registered trademark of Diodes Incorporated.
DFLS260
Document number: DS31476 Rev. 1 - 2
1 of 3
www.diodes.com
June 2008
© Diodes Incorporated
|
▷ |